本篇博客最早发布于实验室公共博客，但已无人维护，现迁移至个人博客

---

引言

一打五师兄走之前留了一块树莓派给我，暑假闲来无事拿出来玩玩

如果每次都连接显示屏和键盘使用有点麻烦而且低级

正常笔记本和树莓派都连着实验室的WIFI，网段一样，是可以ssh远程登录的

但我突然想到在家里连着家里的WIFI能不能也登录进树莓派呢

问题有了，开始干吧

内网穿透初步

正常来说两台Linux设备只有在同一局域网下才可以进行互相的ssh远程登录

那么如果不在一个网段下，比方说一台在家里连着家里的WIFI，一台在学校连着实验室的WIFI，这种情况要想实现ssh远程登录则需要用到内网穿透

这就需要用到一个开源框架frp

https://github.com/fatedier/frp

在这里下载与主机架构对应的版本

https://github.com/fatedier/frp/releases

查看安装的Linux架构/版本

cat /proc/version

prejudice@prejudice-VirtualBox:~$ cat /proc/versionLinux version 5.4.0-122-generic (buildd@lcy02-amd64-035) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #138~18.04.1-Ubuntu SMP Fri Jun 24 14:14:03 UTC 2022[lighthouse@VM-4-11-centos ~]$ cat /proc/version Linux version 4.18.0-348.7.1.el8_5.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 8.5.0 20210514 (Red Hat 8.5.0-4) (GCC)) #1 SMP Wed Dec 22 13:25:12 UTC 2021

💡 x86_64即amd64

学习视频

其实B站搜frp就有很多

如何优雅地访问远程主机？SSH与frp内网穿透配置教程

frp安装使用教程

学习文档

官网给了教程，实在是很贴心

https://gofrp.org/docs/

通过 SSH 访问内网机器

运行下述命令的时候

ssh -oPort=6000 test@x.x.x.x

中间-oPort=6000实际上可以简化为-p 6000

这里的端口是公网用于listen的端口，frp 会将请求 x.x.x.x:6000 的流量转发到内网机器的 22 端口，因此这里x.x.x.x也是公网IP

服务端有两个端口，一个负责接收客户端的连接，一个负责监听与流量转发，有点类似于TCP通信的connectfd和listenfd ，实际上也是基于TCP通信实现的

因此需要在云服务器上打开两个端口的防火墙

简单实操

云服务器端

运行服务端程序

[lighthouse@VM-4-11-centos frp_0.44.0_linux_amd64]$ ./frps -c ./frps.ini 2022/07/21 21:18:23 [I] [root.go:209] frps uses config file: ./frps.ini2022/07/21 21:18:23 [I] [service.go:194] frps tcp listen on 0.0.0.0:70002022/07/21 21:18:23 [I] [root.go:218] frps started successfully

笔记本端运行./frpc -c ./frpc.ini 后，新建个登录窗口

[lighthouse@VM-4-11-centos /]$ ssh -p 6000 redwall@1.116.137.21redwall@1.116.137.21's password: Welcome to Ubuntu 18.04.6 LTS (GNU/Linux 5.4.0-122-generic x86_64) * Documentation:  https://help.ubuntu.com * Management:     https://landscape.canonical.com * Support:        https://ubuntu.com/advantage0 updates can be applied immediately.New release '20.04.4 LTS' available.Run 'do-release-upgrade' to upgrade to it.Your Hardware Enablement Stack (HWE) is supported until April 2023.Last login: Thu Jul 21 17:05:31 2022 from 192.168.1.137redwall@redwall-G3-3500:~$

看到已经成功远程登录，可以进行相关操作了

redwall@redwall-G3-3500:~$ lscatkin_ws  CUDA_Samples  Test  公共的  模板  视频  图片  文档  下载  音乐  桌面redwall@redwall-G3-3500:~$ pwd/home/redwall

注意到客户端连接时会提示

2022/07/21 21:30:39 [I] [service.go:450] [f4703ace8f5e3c8f] client login info: ip [114.213.236.99:47292] version [0.44.0] hostname [] os [linux] arch [amd64]2022/07/21 21:30:39 [I] [tcp.go:64] [f4703ace8f5e3c8f] [ssh] tcp proxy listen port [6000]2022/07/21 21:30:39 [I] [control.go:465] [f4703ace8f5e3c8f] new proxy [ssh] type [tcp] success

有远程登录时会提示

2022/07/21 21:31:01 [I] [proxy.go:179] [f4703ace8f5e3c8f] [ssh] get a user connection [1.116.137.21:52368]

退出ssh远程登录时会提示

2022/07/21 21:28:31 [I] [control.go:307] [a1a79c2d05ad0fae] control writer is closing2022/07/21 21:28:31 [I] [proxy.go:88] [a1a79c2d05ad0fae] [ssh] proxy closing2022/07/21 21:28:31 [W] [proxy.go:176] [a1a79c2d05ad0fae] [ssh] listener is closed: accept tcp [::]:6000: use of closed network connection2022/07/21 21:28:31 [I] [control.go:396] [a1a79c2d05ad0fae] client exit success

还是非常人性化的

笔记本端

打开终端查看网络信息

redwall@redwall-G3-3500:~$ ifconfig enp59s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500        ether 8c:47:be:3b:dd:d2  txqueuelen 1000  (以太网)        RX packets 0  bytes 0 (0.0 B)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 0  bytes 0 (0.0 B)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536        inet 127.0.0.1  netmask 255.0.0.0        inet6 ::1  prefixlen 128  scopeid 0x10<host>        loop  txqueuelen 1000  (本地环回)        RX packets 1351  bytes 123182 (123.1 KB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 1351  bytes 123182 (123.1 KB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0wlp0s20f3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500        inet 192.168.1.137  netmask 255.255.255.0  broadcast 192.168.1.255        inet6 fe80::5348:35ba:d99a:6366  prefixlen 64  scopeid 0x20<link>        ether ac:12:03:c9:3a:01  txqueuelen 1000  (以太网)        RX packets 11079  bytes 12274960 (12.2 MB)        RX errors 0  dropped 0  overruns 0  frame 0        TX packets 3983  bytes 509254 (509.2 KB)        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

简单配置frpc.ini

[common]server_addr = 1.116.137.21server_port = 7000[ssh]type = tcplocal_ip = 192.168.1.137local_port = 22remote_port = 6000

打开一个终端运行

redwall@redwall-G3-3500:~/Test/frp_0.44.0_linux_amd64$ ./frpc -c ./frpc.ini 2022/07/21 21:19:06 [I] [service.go:349] [a1a79c2d05ad0fae] login to server success, get run id [a1a79c2d05ad0fae], server udp port [0]2022/07/21 21:19:06 [I] [proxy_manager.go:144] [a1a79c2d05ad0fae] proxy added: [ssh]2022/07/21 21:19:06 [I] [control.go:181] [a1a79c2d05ad0fae] [ssh] start proxy success

在树莓派配置frp框架

由于树莓派只有2GB的RAM，因此安装的是Ubuntu 18.04 Bionic Beaver

一开始cat /proc/version查看是arm64，因此就在frp Release中下载的arm64版本

实际中会报错cannot execute binary file

linux下解决：cannot execute binary file

原因是程序所需架构与系统不匹配，想起来当时安装的是32位的server，所以换了Release下的arm版本，成功运行

SSH时出现WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!

问题解决——SSH时出现WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!

WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!
翻译过来就是
警告：远程主机标识已更改！

此报错是由于远程的主机的公钥发生了变化导致的

ssh服务是通过公钥和私钥来进行连接的，它会把每个曾经访问过计算机或服务器的公钥（public key），记录在~/.ssh/known_hosts 中，当下次访问曾经访问过的计算机或服务器时，ssh就会核对公钥，如果和上次记录的不同，OpenSSH会发出警告

直接echo >”~/.ssh/known_hosts”可以解决该问题

SSH Failed Permission Denied

服务器无法登录？教你如何解决 SSH Failed Permission Denied

这里主要是与sshd_config的配置有关

修改云服务器上的sshd_config

sudo cd /etc/ssh/sudo cp sshd_config sshd_config_initsudo vim sshd_config

PermitRootLogin yesPasswordAuthentication yesChallengeResponseAuthentication no

对树莓派上的sshd_config进行同样的修改，不过多一个内容

AddressFamily any

成功解决问题

Linux域名IP映射

Linux域名IP映射

进行域名IP映射是为了便于连接时的操作，不然还需要记住一长串IP地址，太麻烦了

sudo vim /etc/hosts# CentOSx.x.x.x centos# Raspberry Pix.x.x.x raspberry

设置frp开机自启

frp设置开机自启

创建service服务文件

cd /etc/systemd/system/sudo touch frpc.servicesudo vim frpc.service

文件内容如下

[Unit]Description=Frp ClientAfter=network.targetWants=network.target[Service]Type=simpleUser=ubuntuRestart=on-failureRestartSec=5ExecStart=/home/ubuntu/frpc_client -c /home/ubuntu/frpc.ini[Install]WantedBy=multi-user.target

这里User是你的用户名，ExecStart是执行文件的地址，更改这两处即可

刷新服务列表

systemctl daemon-reload

设置开机自启

systemctl enable frpc.service

实际效果

首先在云服务器上运行

[root@VM-4-11-centos frp_server]# ./frps -c ./frps.ini 2022/07/22 15:45:25 [I] [root.go:209] frps uses config file: ./frps.ini2022/07/22 15:45:25 [I] [service.go:194] frps tcp listen on 0.0.0.0:70002022/07/22 15:45:25 [I] [root.go:218] frps started successfully

树莓派通电开机后，云服务器终端显示

2022/07/22 15:46:02 [I] [service.go:450] [192daaa5a29e5228] client login info: ip [114.213.236.99:54242] version [0.44.0] hostname [] os [linux] arch [arm]2022/07/22 15:46:02 [I] [tcp.go:64] [192daaa5a29e5228] [ssh] tcp proxy listen port [6000]2022/07/22 15:46:02 [I] [control.go:465] [192daaa5a29e5228] new proxy [ssh] type [tcp] success

可以看到树莓派已经自动连接到云服务器

打开笔记本和手机热点，笔记本连接手机热点，使得笔记本和树莓派连接不同的WIFI

在笔记本终端运行

redwall@redwall-G3-3500:~/frp_client$ ./frpc -c ./frpc.ini 2022/07/22 15:46:31 [I] [service.go:349] [41273076a0105bd8] login to server success, get run id [41273076a0105bd8], server udp port [0]2022/07/22 15:46:31 [I] [proxy_manager.go:144] [41273076a0105bd8] proxy added: [ssh]

此时云服务器终端提示

2022/07/22 15:46:31 [I] [service.go:450] [41273076a0105bd8] client login info: ip [39.144.38.10:42468] version [0.44.0] hostname [] os [linux] arch [amd64]

说明笔记本也连上了云服务器，并且明显可以看出笔记本和树莓派连着不同的WIFI

这时在笔记本新建一个终端，运行

redwall@redwall-G3-3500:~$ ssh -p 6000 ubuntu@centos ubuntu@centos's password: Welcome to Ubuntu 18.04.6 LTS (GNU/Linux 5.4.0-1066-raspi armv7l) * Documentation:  https://help.ubuntu.com * Management:     https://landscape.canonical.com * Support:        https://ubuntu.com/advantage  System information as of Fri Jul 22 07:47:21 UTC 2022  System load:  1.18               Processes:            138  Usage of /:   37.9% of 14.28GB   Users logged in:      0  Memory usage: 5%                 IP address for wlan0: 192.168.1.111  Swap usage:   0% * Super-optimized for small spaces - read how we shrank the memory   footprint of MicroK8s to make it the smallest full K8s around.   https://ubuntu.com/blog/microk8s-memory-optimisation0 updates can be applied immediately.New release '20.04.4 LTS' available.Run 'do-release-upgrade' to upgrade to it.Your Hardware Enablement Stack (HWE) is supported until April 2023.Last login: Fri Jul 22 07:40:35 2022ubuntu@ubuntu:~$ lscatkin_ws  frp_clientubuntu@ubuntu:~$ pwd/home/ubuntuubuntu@ubuntu:~$

可以看到已经成功实现在不同网段下Linux主机间的ssh远程登录

后面就可以进行愉快的编程开发啦

来源地址：https://blog.csdn.net/Solititude/article/details/131362877