锐捷交换机基本配置命令

锐捷交换机基本配置命令

锐捷交换机，忘记colsole口的en密码，重启交换机，立即按ctrl+c，进入bootloader 菜单，再按ctrl+q，然后输入命令：main_config_password_clear，回车，即可进入交换机软件系统，不需要en密码，但重启后就会要求输入密码。用此种方式进入配置界面，更改密码。

hostname SW 更改设备名称为SW

=======================================
username adminhttp privilege 15 web-auth pwd-modify password asdsdff@2023 增加一个用户用于网页登录
enable service web-server http
enable service web-server https
webmaster level 0 username admin password ruijie@123
webmaster level 1 username adminhttp password asdsdff@2023

service dhcp 开启dhcp服务

=======================================
ip dhcp pool 1F
lease 0 0 40
network 172.16.101.0 255.255.255.0
dns-server 202.99.160.68 202.99.166.4
default-router 172.16.101.254
配置dhcp地址池的操作

vlan range 1,10,100-104 设置vlan

=======================================
interface GigabitEthernet 0/1
no switchport
ip address 10.10.10.3 255.255.255.0
设置端口为三层口，并配置ip地址

=======================================
interface GigabitEthernet 0/2
description 2F Zhuxian
switchport access vlan 102
端口加入vlan，端口描述

=======================================
interface VLAN 100
ip address 172.16.0.254 255.255.255.0
设置vlan虚拟接口，并配置ip地址

=======================================
ip route 0.0.0.0 0.0.0.0 10.10.10.1
设置静态路由

show vlan 显示vlan信息

show ip interface brief 显示端口IP地址信息

来源地址：https://blog.csdn.net/weixin_42027077/article/details/129066742