这篇文章主要介绍“kafka-2.11集群的搭建步骤”，在日常操作中，相信很多人在kafka-2.11集群的搭建步骤问题上存在疑惑，小编查阅了各式资料，整理出简单好用的操作方法，希望对大家解答”kafka-2.11集群的搭建步骤”的疑惑有所帮助！接下来，请跟着小编一起来学习吧！
producer:消息生产者,向kafka broker发消息的客户端
consumer:消息消费者,向kafka broker取消息的客户端
Topic:发布到Kafka集群消息的一个类别
broker:一台kafka服务器就是一个broker,一个集群由多个broker组成,一个broker可以容纳多个topic
1.下载安装zookeeper(必须先安装zookeeper和jdk)
[root@node1 ~]# wget http://mirror.bit.edu.cn/apache/zookeeper/stable/zookeeper-3.4.13.tar.gz
[root@node1 ~]# tar xvf zookeeper-3.4.13.tar.gz -C /opt/
[root@node1 ~]# cd /opt/zookeeper-3.4.13/conf/
[root@node1 conf]# vim zoo.cfg
tickTime=2000
dataDir=/opt/zookeeper-3.4.13/data
clientPort=2181
initLimit=5
syncLimit=2
server.1=node1:2888:3888
server.2=node2:2888:3888
server.3=node3:2888:3888
[root@node1 conf]# mkdir /opt/zookeeper-3.4.13/data
[root@node1 conf]# cd /opt/zookeeper-3.4.13/data --myid必须要在data目录下面,否则会报错
[root@node1 data]# cat myid
1
[root@node1 zookeeper-3.4.13]# cd ..
[root@node1 opt]# scp -r zookeeper-3.4.13 node2:/opt/
[root@node1 opt]# scp -r zookeeper-3.4.13 node3:/opt/
2.在node2修改myid文件
[root@node2 opt]# cat /opt/zookeeper-3.4.13/data/myid
2
[root@node2 opt]#
3.在node3修改myid文件
[root@node3 ~]# cat /opt/zookeeper-3.4.13/data/myid
3
[root@node3 ~]# zkServer.sh start --每个节点都要启动zookeeper服务
ZooKeeper JMX enabled by default
Using config: /opt/zookeeper-3.4.13/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
[root@node3 opt]# zkCli.sh --使用客户端登陆
3.下载安装kafka(三个节点一样)
[root@node1 ~]# wget http://mirror.bit.edu.cn/apache/kafka/2.2.0/kafka_2.11-2.2.0.tgz
[root@node1 ~]# tar xvf kafka_2.11-2.2.0.tgz -C /opt/
[root@node1 ~]# cd /opt/kafka_2.11-2.2.0/
[root@node1 kafka_2.11-2.2.0]# cd config/
[root@node1 config]# vim server.properties
broker.id=0 --每个id不一样
zookeeper.connect=172.16.8.23:2181,172.16.8.24:2181,172.16.8.178:2181 --zookeeper集群IP地址
[root@node1 config]# cd /opt/
[root@node1 opt]# scp -r kafka_2.11-2.2.0/ node2:/opt/
[root@node1 opt]# scp -r kafka_2.11-2.2.0/ node3:/opt/
[root@node1 opt]# cd kafka_2.11-2.2.0/bin/
[root@node1 bin]# ./kafka-server-start.sh ../config/server.properties & --三台kafka都要后台启动服务
4.查看kafka服务是否启动正常
[root@node1 bin]# jps
30851 Kafka
3605 HMaster
12728 QuorumPeerMain
12712 DFSZKFailoverController
31656 Jps
3929 DataNode
15707 JournalNode
32188 NameNode
14335 ResourceManager
[root@node1 bin]# netstat -antulp | grep 30851
tcp6 0 0 :::9092 :::* LISTEN 30851/java
tcp6 0 0 :::37161 :::* LISTEN 30851/java
tcp6 0 0 172.16.8.23:40754 172.16.8.178:9092 ESTABLISHED 30851/java
tcp6 0 0 172.16.8.23:9092 172.16.8.23:39704 ESTABLISHED 30851/java
tcp6 0 0 172.16.8.23:45480 172.16.8.24:9092 ESTABLISHED 30851/java
tcp6 0 0 172.16.8.23:45294 172.16.8.178:2181 ESTABLISHED 30851/java
tcp6 0 0 172.16.8.23:39704 172.16.8.23:9092 ESTABLISHED 30851/java
[root@node1 bin]#
5.使用命令接口
[root@node1 bin]# ./kafka-topics.sh --create --zookeeper node1:2181 --topic tongcheng --replication-factor 3 --partitions 3 --创建topic
Created topic tongcheng.
[root@node1 bin]# ./kafka-topics.sh --list --zookeeper node1:2181 --查看topic
tongcheng
[root@node1 bin]# ./kafka-topics.sh --delete --zookeeper node1:2181 --topic tongcheng --删除topic
Topic tongcheng is marked for deletion.
Note: This will have no impact if delete.topic.enable is not set to true.
[root@node1 bin]# ./kafka-topics.sh --list --zookeeper node1:2181
[root@node1 bin]#
6.发送消息/接收消息
[root@node1 bin]# ./kafka-console-producer.sh --broker-list node2:9092 --topic ttt
>tongcheng is goods;
>tong is goods;
>cheng is goods!
>
--------接收端-------------
[root@node2 bin]# ./kafka-console-consumer.sh --topic ttt --bootstrap-server node1:9092,node2:9092,node3:9092 --from-beginning
tongcheng is goods;
tong is goods;
cheng is goods!
[root@node2 bin]# ./kafka-topics.sh --describe --zookeeper node1:2181 --topic ttt --查看分区数和副本数
Topic:tttPartitionCount:1ReplicationFactor:1Configs:
Topic: tttPartition: 0Leader: 0Replicas: 0Isr: 0
[root@node2 bin]#
7.查看zookeeper数据
[root@node1 bin]# ./zkCli.sh
Connecting to localhost:2181
[zk: localhost:2181(CONNECTED) 0] ls /
[cluster, controller, brokers, zookeeper, hadoop-ha, admin, isr_change_notification, log_dir_event_notification, controller_epoch, consumers, latest_producer_id_block, config, hbase]
[zk: localhost:2181(CONNECTED) 1]
8.接收组消息(当消费者发送消息时,只能是组中一个接收都者接收消息)
[root@node1 bin]# ./kafka-console-producer.sh --broker-list node1:9092 --topic tong --在node1节点发送消息
>
------启动两台消费者-----------
[root@node2 bin]# vim ../config/consumer.properties --两台消费都都要修改
group.id=wuhan
[root@node2 bin]# ./kafka-console-consumer.sh --topic tong --bootstrap-server node1:9092 --consumer.config ../config/consumer.properties
[2019-04-05 20:52:09,152] WARN [Consumer clientId=consumer-1, groupId=wuhan] Error while fetching metadata with correlation id 2 :
9.在发送端发送消息,接收端组接收消息
[root@node1 bin]# ./kafka-console-producer.sh --broker-list node1:9092 --topic tong
>[2019-04-05 20:51:31,094] INFO [GroupMetadataManager brokerId=0] Removed 0 expired offsets in 0 milliseconds. (kafka.coordinator.group.GroupMetadataManager)
[2019-04-05 20:52:09,114] INFO Creating topic tong with configuration {} and initial partition assignment Map(0 -> ArrayBuffer(2)) (kafka.zk.AdminZkClient)
[2019-04-05 20:52:09,124] INFO [KafkaApi-0] Auto creation of topic tong with 1 partitions and replication factor 1 is successful (kafka.server.KafkaApis)
>hello ttt;
>
-----------接收端--------------
[root@node2 bin]# ./kafka-console-consumer.sh --topic tong --bootstrap-server node1:9092 --consumer.config ../config/consumer.properties --在node2节点接收到消息
[2019-04-05 20:52:09,152] WARN [Consumer clientId=consumer-1, groupId=wuhan] Error while fetching metadata with correlation id 2 : {tong=LEADER_NOT_AVAILABLE}
(org.apache.kafka.clients.NetworkClient)
hello ttt;
到此，关于“kafka-2.11集群的搭建步骤”的学习就结束了，希望能够解决大家的疑惑。理论与实践的搭配能更好的帮助大家学习，快去试试吧！若想继续学习更多相关知识，请继续关注亿速云网站，小编会继续努力为大家带来更多实用的文章！
