一文详解如何用GPU来运行Python代码/基于Python自制一个文件解压缩小工具-编程学习网

前几天捣鼓了一下Ubuntu，正是想用一下我旧电脑上的N卡，可以用GPU来跑代码，体验一下多核的快乐，感兴趣的小伙伴快跟随小编一起了解一下吧

简介

前几天捣鼓了一下Ubuntu，正是想用一下我旧电脑上的N卡，可以用GPU来跑代码，体验一下多核的快乐。

还好我这破电脑也是支持Cuda的：

$ sudo lshw -C display

*-display

description: 3D controller

product: GK208M [GeForce GT 740M]

vendor: NVIDIA Corporation

physical id: 0

bus info: pci@0000:01:00.0

version: a1

width: 64 bits

clock: 33MHz

capabilities: pm msi pciexpress bus_master cap_list rom

configuration: driver=nouveau latency=0

resources: irq:35 memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:6000(size=128)

安装相关工具

首先安装一下Cuda的开发工具，命令如下：

1	`$` `sudo` `apt` `install` `nvidia-cuda-toolkit`

查看一下相关信息：

$ nvcc --version

nvcc: NVIDIA (R) Cuda compiler driver

Built on Thu_Nov_18_09:45:30_PST_2021

Cuda compilation tools, release 11.5, V11.5.119

Build cuda_11.5.r11.5/compiler.30672275_0

通过Conda安装相关的依赖包：

1	`conda` `install` `numba & conda` `install` `cudatoolkit`

通过pip安装也可以，一样的。

测试与驱动安装

简单测试了一下，发觉报错了：

$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/test1.py

Traceback (most recent call last):

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 246, in ensure_initialized

self.cuInit(0)

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 319, in safe_cuda_api_call

self._check_ctypes_error(fname, retcode)

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 387, in _check_ctypes_error

raise CudaAPIError(retcode, msg)

numba.cuda.cudadrv.driver.CudaAPIError: [100] Call to cuInit results in CUDA_ERROR_NO_DEVICE

During handling of the above exception, another exception occurred:

Traceback (most recent call last):

File "/home/larry/code/pkslow-samples/python/src/main/python/cuda/test1.py", line 15, in

gpu_print[1, 2]()

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 862, in __getitem__

return self.configure(*args)

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 857, in configure

return _KernelConfiguration(self, griddim, blockdim, stream, sharedmem)

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 718, in __init__

ctx = get_context()

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 220, in get_context

return _runtime.get_or_create_context(devnum)

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 138, in get_or_create_context

return self._get_or_create_context_uncached(devnum)

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 153, in _get_or_create_context_uncached

with driver.get_active_context() as ac:

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 487, in __enter__

driver.cuCtxGetCurrent(byref(hctx))

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 284, in __getattr__

self.ensure_initialized()

File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 250, in ensure_initialized

raise CudaSupportError(f"Error at driver init: {description}")

numba.cuda.cudadrv.error.CudaSupportError: Error at driver init: Call to cuInit results in CUDA_ERROR_NO_DEVICE (100)

网上搜了一下，发现是驱动问题。通过Ubuntu自带的工具安装显卡驱动：

还是失败：

1 2	`$ nvidia-smi` `NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.`

最后，通过命令行安装驱动，成功解决这个问题：

1	`$` `sudo` `apt` `install` `nvidia-driver-470`

检查后发现正常了：

$ nvidia-smi

Wed Dec 7 22:13:49 2022

+-----------------------------------------------------------------------------+

| NVIDIA-SMI 470.161.03 Driver Version: 470.161.03 CUDA Version: 11.4 |

|-------------------------------+----------------------+----------------------+

| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |

| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |

| | | MIG M. |

|===============================+======================+======================|

| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 N/A | N/A |

| N/A 51C P8 N/A / N/A | 4MiB / 2004MiB | N/A Default |

| | | N/A |

+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+

| Processes: |

| GPU GI CI PID Type Process name GPU Memory |

| ID ID Usage |

|=============================================================================|

| No running processes found |

+-----------------------------------------------------------------------------+

测试代码也可以跑了。

测试Python代码

打印ID

准备以下代码：

from numba import cuda

import os

def cpu_print():

print('cpu print')

@cuda.jit

def gpu_print():

dataIndex = cuda.threadIdx.x + cuda.blockIdx.x * cuda.blockDim.x

print('gpu print ', cuda.threadIdx.x, cuda.blockIdx.x, cuda.blockDim.x, dataIndex)

if __name__ == '__main__':

gpu_print[4, 4]()

cuda.synchronize()

cpu_print()

这个代码主要有两个函数，一个是用CPU执行，一个是用GPU执行，执行打印操作。关键在于@cuda.jit这个注解，让代码在GPU上执行。运行结果如下：

$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/print_test.py
gpu print 0 3 4 12
gpu print 1 3 4 13
gpu print 2 3 4 14
gpu print 3 3 4 15
gpu print 0 2 4 8
gpu print 1 2 4 9
gpu print 2 2 4 10
gpu print 3 2 4 11
gpu print 0 1 4 4
gpu print 1 1 4 5
gpu print 2 1 4 6
gpu print 3 1 4 7
gpu print 0 0 4 0
gpu print 1 0 4 1
gpu print 2 0 4 2
gpu print 3 0 4 3
cpu print

可以看到GPU总共打印了16次，使用了不同的Thread来执行。这次每次打印的结果都可能不同，因为提交GPU是异步执行的，无法确保哪个单元先执行。同时也需要调用同步函数cuda.synchronize()，确保GPU执行完再继续往下跑。

查看时间

我们通过这个函数来看GPU并行的力量：

from numba import jit, cuda

import numpy as np

# to measure exec time

from timeit import default_timer as timer

# normal function to run on cpu

def func(a):

for i in range(10000000):

a[i] += 1

# function optimized to run on gpu

@jit(target_backend='cuda')

def func2(a):

for i in range(10000000):

a[i] += 1

if __name__ == "__main__":

n = 10000000

a = np.ones(n, dtype=np.float64)

start = timer()

func(a)

print("without GPU:", timer() - start)

start = timer()

func2(a)

print("with GPU:", timer() - start)

结果如下：

$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/time_test.py
without GPU: 3.7136273959999926
with GPU: 0.4040513340000871

可以看到使用CPU需要3.7秒，而GPU则只要0.4秒，还是能快不少的。当然这里不是说GPU一定比CPU快，具体要看任务的类型。

以上就是一文详解如何用GPU来运行Python代码的详细内容。

基于Python自制一个文件解压缩小工具

经常在办公的过程中会遇到各种各样的压缩文件处理，但是呢每个压缩软件支持的格式又是不同的。本文就来用Python自制一个文件解压缩小工具，可以支持7z/zip/rar三种格式，希望对大家有所帮助

经常在办公的过程中会遇到各种各样的压缩文件处理，但是呢每个压缩软件支持的格式又是不同的。

没有可以一种可以同时多种格式的并且免费的文件解压缩工具，于是我使用python的PyQt5开发出这个文件解压缩的小工具。

接下来，我们将开发过程中需要的python非标准库以及代码块做一个简单的介绍，有兴趣的小伙伴可以停下脚步一起来看看。

一般在windows的操作系统下文件解压缩的格式就是7z/zip/rar这三种，首先我们需要安装一下PyQt5以及需要文件解压缩处理的模块。

这里我们直接使用的是pip的安装方式进行安装，我的pip默认配置的是全局的清华大学镜像站。

pip install PyQt5

pip install py7zr

pip install rarfile

然后，在开始之前我们将需要的python标准或非标准模块全部导入代码块中准备进入下面的开发环节。

# Importing all the classes from the PyQt5.QtGui module.

from PyQt5.QtGui import *

# Importing all the classes from the PyQt5.QtWidgets module.

from PyQt5.QtWidgets import *

# Importing all the classes from the PyQt5.QtCore module.

from PyQt5.QtCore import *

# `import os` is importing the os module.

import os

# `import sys` is importing the sys module.

import sys

# `import zipfile as zip` is importing the zipfile module as zip.

import zipfile as zip

# `import py7zr` is importing the py7zr module.

import py7zr

# `import rarfile as rar` is importing the rarfile module as rar.

import rarfile as rar

# Importing the traceback module.

import traceback

import images

至此，我们开发需要使用到的python模块就全部导入进来了，这里说明一下我们使用到的英文注释是通过pycharm的AI插件直接生成的。

首先，创建一个名称为CompressUI的python类，将所有的UI页面组件及布局全部放在这个类中进行开发。

以及包括UI页面组件关联的槽函数也放在这个类中，也就是在CompressUI类中我们只处理页面操作相关的部分不做具体逻辑的实现。

class CompressUI(QWidget):

def __init__(self):

super(CompressUI, self).__init__()

self.init_ui()

def init_ui(self):

self.setWindowTitle('文件解压缩处理工具公众号：Python 集中营')

self.setWindowIcon(QIcon(':/analysis.ico'))

self.resize(600, 400)

self.compress_file_type = QLabel()

self.compress_file_type.setText('解压缩文件类型：')

self.compress_file_type_combox = QComboBox()

self.compress_file_type_combox.addItems(['7z格式', 'zip格式', 'rar格式'])

self.file_catch_type = QLabel()

self.file_catch_type.setText('文件处理方式：')

self.file_catch_type_combox = QComboBox()

self.file_catch_type_combox.addItems(['压缩', '解压缩'])

self.source_dir_or_file = QLineEdit()

self.source_dir_or_file.setPlaceholderText('来源目录或文件路径...')

self.source_dir_or_file_btn = QPushButton()

self.source_dir_or_file_btn.setText('加载来源目录或文件')

self.source_dir_or_file_btn.clicked.connect(self.source_dir_or_file_btn_clk)

self.target_dir_or_file = QLineEdit()

self.target_dir_or_file.setPlaceholderText('目标目录路径...')

self.target_dir_or_file_btn = QPushButton()

self.target_dir_or_file_btn.setText('选择目标路径')

self.target_dir_or_file_btn.clicked.connect(self.target_dir_or_file_btn_clk)

self.start_btn = QPushButton()

self.start_btn.setText('开始执行文件压缩或解压缩处理')

self.start_btn.clicked.connect(self.start_btn_clk)

self.brower = QTextBrowser()

self.brower.setReadOnly(True)

self.brower.setFont(QFont('宋体', 8))

self.brower.setPlaceholderText('日志处理过程区域...')

self.brower.ensureCursorVisible()

grid = QGridLayout()

grid.addWidget(self.compress_file_type, 0, 0, 1, 2)

grid.addWidget(self.compress_file_type_combox, 0, 2, 1, 1)

grid.addWidget(self.file_catch_type, 1, 0, 1, 2)

grid.addWidget(self.file_catch_type_combox, 1, 2, 1, 1)

grid.addWidget(self.source_dir_or_file, 2, 0, 1, 2)

grid.addWidget(self.source_dir_or_file_btn, 2, 2, 1, 1)

grid.addWidget(self.target_dir_or_file, 3, 0, 1, 2)

grid.addWidget(self.target_dir_or_file_btn, 3, 2, 1, 1)

grid.addWidget(self.start_btn, 4, 0, 1, 3)

grid.addWidget(self.brower, 5, 0, 1, 3)

self.thread_ = WorkThread(self)

self.thread_.message.connect(self.show_message)

self.thread_.finished.connect(self.thread_is_finished)

self.setLayout(grid)

def show_message(self, text):

cursor = self.brower.textCursor()

cursor.movePosition(QTextCursor.End)

self.brower.append(text)

self.brower.setTextCursor(cursor)

self.brower.ensureCursorVisible()

def target_dir_or_file_btn_clk(self):

target_dir_or_file_path = QFileDialog.getExistingDirectory(self, '选择文件夹', os.getcwd())

self.target_dir_or_file.setText(target_dir_or_file_path)

def source_dir_or_file_btn_clk(self):

file_catch_type = self.file_catch_type_combox.currentText()

if file_catch_type == '压缩':

source_dir_or_file_path = QFileDialog.getExistingDirectory(self, '选择文件夹', os.getcwd())

self.source_dir_or_file.setText(source_dir_or_file_path)

else:

source_dir_or_file_path = QFileDialog.getOpenFileName(self, "选取文件", os.getcwd(),

"RAR File (*.rar);;ZIP File (*.zip);;7z File (*.7z)")

self.source_dir_or_file.setText(source_dir_or_file_path[0])

def start_btn_clk(self):

self.start_btn.setEnabled(False)

self.thread_.start()

def thread_is_finished(self, text):

if text is True:

self.start_btn.setEnabled(True)

以上就是整个UI页面组件/布局以及组件对应的槽函数的的开发过程了，有需要的小伙伴可以仔细研究一下。

接下来进入具体业务的开发环节，我们创建一个名称为WorkThread的python类，该类继承自QThread的子线程。

并且在子线程中可以接收主线程的变量参数，以及向主线程中传递信息的操作。将子线程执行的过程信息实时传递到主线程的文本浏览器中。

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

class WorkThread(QThread):

message = pyqtSignal(str)

finished = pyqtSignal(bool)

def __init__(self, parent=None):

super(WorkThread, self).__init__(parent)

self.parent = parent

self.working = True

def __del__(self):

self.working = False

def run(self):

try:

compress_file_type = self.parent.compress_file_type_combox.currentText()

file_catch_type = self.parent.file_catch_type_combox.currentText()

source_dir_or_file = self.parent.source_dir_or_file.text().strip()

target_dir_or_file = self.parent.target_dir_or_file.text().strip()

if source_dir_or_file == '' or target_dir_or_file == '':

self.message.emit('来源或目标文件路径为空，请检查参数设置！')

return

if file_catch_type == '压缩' and os.path.isfile(source_dir_or_file):

self.message.emit('当处理类型为：压缩，来源类型应该选择文件夹，请按顺序设置参数！')

return

if file_catch_type == '解压缩' and os.path.isdir(source_dir_or_file):

self.message.emit('当处理类型为：解压缩，来源类型应该选择文件，请按顺序设置参数！')

return

self.message.emit('准备处理的格式类星星为：{}'.format(compress_file_type))

self.message.emit('准备处理的处理类型为：{}'.format(file_catch_type))

self.message.emit('来源文件或目录的路径为：{}'.format(source_dir_or_file))

self.message.emit('目标目录的路径为：{}'.format(target_dir_or_file))

if compress_file_type == 'zip格式':

if file_catch_type == '压缩':

self.do_zip(source_dir_or_file, target_dir_or_file)

else:

self.un_zip(source_dir_or_file, target_dir_or_file)

elif compress_file_type == 'rar格式':

if file_catch_type == '压缩':

self.message.emit('rar格式的文件压缩正在玩命开发中，请关注后续版本更新！')

else:

self.un_rar(source_dir_or_file, target_dir_or_file)

elif compress_file_type == '7z格式':

if file_catch_type == '压缩':

self.do_7z(source_dir_or_file, target_dir_or_file)

else:

self.un_7z(source_dir_or_file, target_dir_or_file)

self.message.emit('当前处理过程：{}完成！'.format(file_catch_type))

self.finished.emit(True)

except:

traceback.print_exc()

self.finished.emit(True)

def do_zip(self, source_, target_file):

"""

If the user selects the "压缩" option, then the user can select a directory, and the path of the directory will be

displayed in the text box

"""

zip_file = zip.ZipFile(target_file, 'w')

pre_len = len(os.path.dirname(source_))

for parent, dirnames, filenames in os.walk(source_):

for filename in filenames:

print(f'{filename}')

path_file = os.path.join(parent, filename)

arcname = path_file[pre_len:].strip(os.path.sep)

zip_file.write(path_file, arcname)

zip_file.close()

def un_zip(self, source_file, target_):

"""

> Unzip a file to a target directory

:param source_file: The file you want to unzip

:param target_: the directory where you want to unzip the file

"""

zip_file = zip.ZipFile(source_file)

if os.path.isdir(target_):

pass

else:

os.mkdir(target_)

for names in zip_file.namelist():

zip_file.extract(names, target_)

zip_file.close()

def do_7z(self, source_, target_file):

"""

> This function takes a source file and a target file and compresses the source file into the target file using 7z

:param source_: The source file or directory to be compressed

:param target_file: The name of the file to be created

"""

with py7zr.SevenZipFile(target_file, 'r') as file:

file.extractall(path=source_)

def un_7z(self, source_file, target_):

"""

It takes a source directory and a target file, and creates a zip file containing the contents of the source

directory

:param source_: The path to the folder you want to zip

:param target_file: The path to the zip file you want to create

"""

with py7zr.SevenZipFile(source_file, 'w') as file:

file.writeall(target_)

def un_rar(self, source_file, target_):

"""

It takes a source file and a target directory and unzips the source file into the target directory

:param source_file: The path to the RAR file you want to extract

:param target_: The directory where you want the files to be extracted to

"""

obj_ = rar.RarFile(source_file.decode('utf-8'))

obj_.extractall(target_.decode('utf-8'))

最后，使用python模块的主函数main，将整个应用加入到主体循环过程中就可以启动整个桌面应用了。

if __name__ == '__main__':

app = QApplication(sys.argv)

main = CompressUI()

main.show()

sys.exit(app.exec_())

完成上述的开发工作之后，我们可以选择使用常用的pyinstaller打包模块对整个应用进行打包操作，打包细节可以参考我的历史文章中的说明！

点击拿去
50G+学习视频教程
100+Python初阶、中阶、高阶电子书籍

来源地址：https://blog.csdn.net/ai520wangzha/article/details/131395539

文章详情

一文详解如何用GPU来运行Python代码/基于Python自制一个文件解压缩小工具

简介

安装相关工具

测试与驱动安装

测试Python代码

打印ID

查看时间

基于Python自制一个文件解压缩小工具

软考中级精品资料免费领

相关文章

猜你喜欢

一文详解如何用GPU来运行Python代码/基于Python自制一个文件解压缩小工具

基于Python自制一个文件解压缩小工具

基于Python制作一个文件解压缩工具

基于Python怎么制作一个文件解压缩工具

一文详解如何用GPU来运行Python代码