实验环境介绍
源库：1 1.2.0.1 rac库 2个节点
目标库：11.2.0. 1 RHEL6.5
1.2.4 本文简介
本文也可以理解成rac 环境下的如何数据库迁移到单实例的数据库环境下，默认目标库已经安装好了同源库一样的数据库版本。
另外注意，BLOG 中代码部分需要特别关注的地方我都用黄色背景和红色字体来表示，比如下边的例子中，thread 1的最大归档日志号为33，thread 2的最大归档日志号为43 是需要特别关注的地方。
List of Archived Logs in backup set 11
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- ------------------- ---------- ---------
1 32 1621589 2015-05-29 11:09:52 1625242 2015-05-29 11:15:48
1 33 1625242 2015-05-29 11:15:48 1625293 2015-05-29 11:15:58
2 42 1613951 2015-05-29 10:41:18 1625245 2015-05-29 11:15:49
2 43 1625245 2015-05-29 11:15:49 1625253 2015-05-29 11:15:53
1.3 实验部分
1.3.1 实验目标
将11.2.0.1 下的rac库备份并恢复到11.2.0.1 下的单实例环境下。
1.3.2 源 rac 库执行
rac 库需要执行备份并传递到目标库。
1.3.2.1 查看 rac 环境及创建测试表
[root@node2 ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
#public
192.168.1.31 node1
192.168.1.32 node2
#vip
192.168.1.131 node1-vip
192.168.1.132 node2-vip
#priv
9.9.9.31 node1-priv
9.9.9.32 node2-priv
#scan
192.168.1.35 cluster-scan
[root@node2 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:79:BA:86
inet addr: 192.168.1.32 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:150190 errors:0 dropped:0 overruns:0 frame:0
TX packets:109804 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:205303912 (195.7 MiB) TX bytes:20182601 (19.2 MiB)
eth0:1 Link encap:Ethernet HWaddr 00:0C:29:79:BA:86
inet addr:192.168.1.132 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
eth2 Link encap:Ethernet HWaddr 00:0C:29:79:BA:90
inet addr:9.9.9.32 Bcast:9.9.9.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:49075 errors:0 dropped:0 overruns:0 frame:0
TX packets:49811 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23642469 (22.5 MiB) TX bytes:31528595 (30.0 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16496 errors:0 dropped:0 overruns:0 frame:0
TX packets:16496 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15118447 (14.4 MiB) TX bytes:15118447 (14.4 MiB)
[root@node2 ~]#
[root@node2 ~]# crsstat
Name Type Target State Host
------------------------------ -------------------------- ---------- --------- -------
ora.ARCH.dg ora.diskgroup.type ONLINE ONLINE node1
ora.DATA.dg ora.diskgroup.type ONLINE ONLINE node1
ora.LISTENER.lsnr ora.listener.type ONLINE ONLINE node1
ora.LISTENER_SCAN1.lsnr ora.scan_listener.type ONLINE ONLINE node1
ora.OVDISK.dg ora.diskgroup.type ONLINE ONLINE node1
ora.TEST.dg ora.diskgroup.type ONLINE ONLINE node1
ora.asm ora.asm.type ONLINE ONLINE node1
ora.db.db ora.database.type OFFLINE OFFLINE
ora.eons ora.eons.type ONLINE ONLINE node1
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora.jmrac.db ora.database.type ONLINE ONLINE node1
ora.jmrac.haha.svc ora.service.type ONLINE ONLINE node1
ora.net1.network ora.network.type ONLINE ONLINE node1
ora.node1.ASM1.asm application ONLINE ONLINE node1
ora.node1.LISTENER_NODE1.lsnr application ONLINE ONLINE node1
ora.node1.gsd application OFFLINE OFFLINE
ora.node1.ons application ONLINE ONLINE node1
ora.node1.vip ora.cluster_vip_net1.type ONLINE ONLINE node1
ora.node2.ASM2.asm application ONLINE ONLINE node2
ora.node2.LISTENER_NODE2.lsnr application ONLINE ONLINE node2
ora.node2.gsd application OFFLINE OFFLINE
ora.node2.ons application ONLINE ONLINE node2
ora.node2.vip ora.cluster_vip_net1.type ONLINE ONLINE node2
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node1
ora.ora11g.db ora.database.type OFFLINE OFFLINE
ora.registry.acfs ora.registry.acfs.type ONLINE ONLINE node1
ora.scan1.vip ora.scan_vip.type ONLINE ONLINE node1
[root@node2 ~]#
[oracle@node2 ~]$ ORACLE_SID= jmrac2
[oracle@node2 ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 29 10:58:42 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL> show parameter cluster
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
cluster_database boolean TRUE
cluster_database_instances integer 2
cluster_interconnects string
SQL> show parameter name
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
db_file_name_convert string
db_name string jmrac
db_unique_name string jmrac
global_names boolean FALSE
instance_name string jmrac2
lock_name_space string
log_file_name_convert string
service_names string HAHA
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 41
Next log sequence to archive 42
Current log sequence 42
SQL>
SQL> create table lhr.rac_to_single_test as select * from dba_objects;
Table created.
SQL> select count(1) from lhr.rac_to_single_test ;
COUNT(1)
----------
72510
SQL>
SQL> set line 9999 pagesize 9999
SQL> col FILE_NAME format a60
SQL> select 'datafile' file_type, file#,name FILE_NAME,status,enabled from v$datafile
2 union all
3 select 'tempfile',file#,name FILE_NAME,status,enabled from v$tempfile
4 union all
5 select 'logfile',group# file#,member FILE_NAME,status,'' from v$logfile
6 union all
7 select 'controlfile', to_number('') ,name FILE_NAME,status,'' from v$controlfile
8 ;
FILE_TYPE FILE# FILE_NAME STATUS ENABLED
----------- ---------- ------------------------------------------------------------ ------- ----------
datafile 1 +DATA/jmrac/datafile/system.268.877470209 SYSTEM READ WRITE
datafile 2 +DATA/jmrac/datafile/sysaux.269.877470211 ONLINE READ WRITE
datafile 3 +DATA/jmrac/datafile/undotbs1.270.877470213 ONLINE READ WRITE
datafile 4 +DATA/jmrac/datafile/users.271.877470213 ONLINE READ WRITE
datafile 5 +DATA/jmrac/datafile/example.279.877470401 ONLINE READ WRITE
datafile 6 +DATA/jmrac/datafile/undotbs2.280.877470779 ONLINE READ WRITE
tempfile 1 +DATA/jmrac/tempfile/temp.278.877470381 ONLINE READ WRITE
logfile 2 +DATA/jmrac/onlinelog/group_2.276.877470349
logfile 2 +DATA/jmrac/onlinelog/group_2.277.877470349
logfile 1 +DATA/jmrac/onlinelog/group_1.274.877470345
logfile 1 +DATA/jmrac/onlinelog/group_1.275.877470345
logfile 3 +DATA/jmrac/onlinelog/group_3.281.877470929
logfile 3 +DATA/jmrac/onlinelog/group_3.282.877470931
logfile 4 +DATA/jmrac/onlinelog/group_4.283.877470937
logfile 4 +DATA/jmrac/onlinelog/group_4.284.877470943
controlfile +DATA/jmrac/controlfile/current.273.877470341
controlfile +DATA/jmrac/controlfile/current.272.877470343
17 rows selected.
SQL>
我后续将在192.168.1.32 即rac的第二个节点上执行操作，db_name为jmrac，数据库为归档模式，创建测试表lhr.rac_to_single_test，数据量为72510 行，其中有个crsstat命令，可以参考：【RAC】如何让Oracle RAC crs_stat 命令显示完整 <a http:="" blog.itpub.net="" 26736162="" viewspace-1610957="" "="" ?="" style=";padding: 0px"> http://blog.itpub.net/26736162/viewspace-1610957/
1.3.2.2 生成 pfile 文件
SQL> show parameter instance_n
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
instance_name string jmrac2
instance_number integer 2
SQL> show parameter spfile
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
spfile string +DATA/jmrac/spfilejmrac.ora
SQL> create pfile='/home/oracle/rman_back/initjmrac.ora' from spfile;
File created.
SQL>
1.3.2.3 执行备份操作
备份脚本如下：
run
{
allocate channel c1 type disk;
allocate channel c2 type disk;
backup database format '/home/oracle/rman_back/full_%n_%T_%t_%s_%p.bak';
sql 'alter system archive log current';
backup archivelog all format '/home/oracle/rman_back/arch_%d_%T_%s_%p.bak' delete input;
backup current controlfile format '/home/oracle/rman_back/ctl_%d_%T_%s_%p.bak';
release channel c1;
release channel c2;
}
执行过程如下：
[oracle@node2 ~]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 29 11:12:51 2015
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: JMRAC (DBID=1916705604)
{
run
2> {
3> allocate channel c1 type disk;
4> allocate channel c2 type disk;
5> backup database format '/home/oracle/rman_back/full_%n_%T_%t_%s_%p.bak';
6> sql 'alter system archive log current';
7> backup archivelog all format '/home/oracle/rman_back/arch_%d_%T_%s_%p.bak' delete input;
8> backup current controlfile format '/home/oracle/rman_back/ctl_%d_%T_%s_%p.bak';
9> release channel c1;
10> release channel c2;
11> }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=55 instance=jmrac2 device type=DISK
allocated channel: c2
channel c2: SID=57 instance=jmrac2 device type=DISK
Starting backup at 29-MAY-2015 11:12:59
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=+DATA/jmrac/datafile/system.268.877470209
input datafile file number=00004 name=+DATA/jmrac/datafile/users.271.877470213
input datafile file number=00006 name=+DATA/jmrac/datafile/undotbs2.280.877470779
channel c1: starting piece 1 at 29-MAY-2015 11:13:00
channel c2: starting full datafile backup set
channel c2: specifying datafile(s) in backup set
input datafile file number=00002 name=+DATA/jmrac/datafile/sysaux.269.877470211
input datafile file number=00005 name=+DATA/jmrac/datafile/example.279.877470401
input datafile file number=00003 name=+DATA/jmrac/datafile/undotbs1.270.877470213
channel c2: starting piece 1 at 29-MAY-2015 11:13:00
channel c1: finished piece 1 at 29-MAY-2015 11:15:35
piece handle=/home/oracle/rman_back/full_JMRACxxx_20150529_880974780_5_1.bak tag=TAG20150529T111259 comment=NONE
channel c1: backup set complete, elapsed time: 00:02:35
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
channel c2: finished piece 1 at 29-MAY-2015 11:15:35
piece handle=/home/oracle/rman_back/full_JMRACxxx_20150529_880974780_6_1.bak tag=TAG20150529T111259 comment=NONE
channel c2: backup set complete, elapsed time: 00:02:35
channel c2: starting full datafile backup set
channel c2: specifying datafile(s) in backup set
including current SPFILE in backup set
channel c2: starting piece 1 at 29-MAY-2015 11:15:35
including current control file in backup set
channel c1: starting piece 1 at 29-MAY-2015 11:15:38
channel c2: finished piece 1 at 29-MAY-2015 11:15:38
piece handle=/home/oracle/rman_back/full_JMRACxxx_20150529_880974935_8_1.bak tag=TAG20150529T111259 comment=NONE
channel c2: backup set complete, elapsed time: 00:00:03
channel c1: finished piece 1 at 29-MAY-2015 11:15:40
piece handle=/home/oracle/rman_back/full_JMRACxxx_20150529_880974935_7_1.bak tag=TAG20150529T111259 comment=NONE
channel c1: backup set complete, elapsed time: 00:00:02
Finished backup at 29-MAY-2015 11:15:40
sql statement: alter system archive log current
Starting backup at 29-MAY-2015 11:15:53
current log archived
channel c1: starting archived log backup set
channel c1: specifying archived log(s) in backup set
input archived log thread=2 sequence=31 RECID=50 STAMP=879502099
input archived log thread=1 sequence=24 RECID=52 STAMP=879511365
input archived log thread=2 sequence=32 RECID=51 STAMP=879502100
input archived log thread=1 sequence=25 RECID=55 STAMP=879527440
input archived log thread=2 sequence=33 RECID=53 STAMP=879522769
input archived log thread=2 sequence=34 RECID=54 STAMP=879527240
input archived log thread=2 sequence=35 RECID=57 STAMP=879586992
input archived log thread=1 sequence=26 RECID=56 STAMP=879527447
input archived log thread=1 sequence=27 RECID=60 STAMP=879590456
input archived log thread=2 sequence=36 RECID=58 STAMP=879586995
input archived log thread=2 sequence=37 RECID=59 STAMP=879590456
input archived log thread=1 sequence=28 RECID=61 STAMP=879590457
channel c1: starting piece 1 at 29-MAY-2015 11:16:05
channel c2: starting archived log backup set
channel c2: specifying archived log(s) in backup set
input archived log thread=2 sequence=38 RECID=63 STAMP=880971338
input archived log thread=1 sequence=29 RECID=62 STAMP=880971333
input archived log thread=2 sequence=39 RECID=64 STAMP=880971341
input archived log thread=1 sequence=30 RECID=65 STAMP=880972786
input archived log thread=2 sequence=40 RECID=66 STAMP=880972787
input archived log thread=2 sequence=41 RECID=67 STAMP=880972787
input archived log thread=1 sequence=31 RECID=68 STAMP=880974598
channel c2: starting piece 1 at 29-MAY-2015 11:16:05
channel c1: finished piece 1 at 29-MAY-2015 11:16:20
piece handle=/home/oracle/rman_back/arch_JMRAC_20150529_9_1.bak tag=TAG20150529T111603 comment=NONE
channel c1: backup set complete, elapsed time: 00:00:15
channel c1: deleting archived log(s)
archived log file name=+DATA/jmrac/archivelog/2015_05_12/thread_2_seq_31.359.879502097 RECID=50 STAMP=879502099
archived log file name=+DATA/jmrac/archivelog/2015_05_12/thread_1_seq_24.356.879511361 RECID=52 STAMP=879511365
archived log file name=+DATA/jmrac/archivelog/2015_05_12/thread_2_seq_32.357.879502099 RECID=51 STAMP=879502100
archived log file name=+DATA/jmrac/archivelog/2015_05_12/thread_1_seq_25.352.879527441 RECID=55 STAMP=879527440
archived log file name=+DATA/jmrac/archivelog/2015_05_12/thread_2_seq_33.353.879522767 RECID=53 STAMP=879522769
archived log file name=+DATA/jmrac/archivelog/2015_05_12/thread_2_seq_34.351.879527239 RECID=54 STAMP=879527240
archived log file name=+DATA/jmrac/archivelog/2015_05_13/thread_2_seq_35.333.879586991 RECID=57 STAMP=879586992
archived log file name=+DATA/jmrac/archivelog/2015_05_12/thread_1_seq_26.335.879527445 RECID=56 STAMP=879527447
archived log file name=+DATA/jmrac/archivelog/2015_05_13/thread_1_seq_27.331.879590457 RECID=60 STAMP=879590456
archived log file name=+DATA/jmrac/archivelog/2015_05_13/thread_2_seq_36.334.879586995 RECID=58 STAMP=879586995
archived log file name=+DATA/jmrac/archivelog/2015_05_13/thread_2_seq_37.332.879590455 RECID=59 STAMP=879590456
archived log file name=+DATA/jmrac/archivelog/2015_05_13/thread_1_seq_28.329.879590457 RECID=61 STAMP=879590457
channel c1: starting archived log backup set
channel c1: specifying archived log(s) in backup set
input archived log thread=2 sequence=42 RECID=70 STAMP=880974952
input archived log thread=1 sequence=32 RECID=69 STAMP=880974952
input archived log thread=1 sequence=33 RECID=72 STAMP=880974959
input archived log thread=2 sequence=43 RECID=71 STAMP=880974953
channel c1: starting piece 1 at 29-MAY-2015 11:16:23
channel c2: finished piece 1 at 29-MAY-2015 11:16:23
piece handle=/home/oracle/rman_back/arch_JMRAC_20150529_10_1.bak tag=TAG20150529T111603 comment=NONE
channel c2: backup set complete, elapsed time: 00:00:18
channel c2: deleting archived log(s)
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_2_seq_38.330.880971315 RECID=63 STAMP=880971338
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_1_seq_29.327.880971317 RECID=62 STAMP=880971333
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_2_seq_39.326.880971341 RECID=64 STAMP=880971341
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_1_seq_30.328.880972785 RECID=65 STAMP=880972786
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_2_seq_40.325.880972785 RECID=66 STAMP=880972787
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_2_seq_41.324.880972787 RECID=67 STAMP=880972787
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_1_seq_31.322.880974595 RECID=68 STAMP=880974598
channel c1: finished piece 1 at 29-MAY-2015 11:16:23
piece handle=/home/oracle/rman_back/arch_JMRAC_20150529_11_1.bak tag=TAG20150529T111603 comment=NONE
channel c1: backup set complete, elapsed time: 00:00:00
channel c1: deleting archived log(s)
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_2_seq_42.321.880974951 RECID=70 STAMP=880974952
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_1_seq_32.323.880974951 RECID=69 STAMP=880974952
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_1_seq_33.318.880974959 RECID=72 STAMP=880974959
archived log file name=+DATA/jmrac/archivelog/2015_05_29/thread_2_seq_43.320.880974953 RECID=71 STAMP=880974953
Finished backup at 29-MAY-2015 11:16:23
Starting backup at 29-MAY-2015 11:16:24
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
including current control file in backup set
channel c1: starting piece 1 at 29-MAY-2015 11:16:25
channel c1: finished piece 1 at 29-MAY-2015 11:16:26
piece handle=/home/oracle/rman_back/ctl_JMRAC_20150529_12_1.bak tag=TAG20150529T111624 comment=NONE
channel c1: backup set complete, elapsed time: 00:00:01
Finished backup at 29-MAY-2015 11:16:26
released channel: c1
released channel: c2
RMAN>
RMAN> exit
Recovery Manager complete.
[oracle@node2 ~]$ cd rman_back/
[oracle@node2 rman_back]$ ll
total 1313928
-rw-r----- 1 oracle asmadmin 85005824 May 29 11:16 arch_JMRAC_20150529_10_1.bak
-rw-r----- 1 oracle asmadmin 14320128 May 29 11:16 arch_JMRAC_20150529_11_1.bak
-rw-r----- 1 oracle asmadmin 34693632 May 29 11:16 arch_JMRAC_20150529_9_1.bak
-rw-r----- 1 oracle asmadmin 18579456 May 29 11:16 ctl_JMRAC_20150529_12_1.bak
-rw-r----- 1 oracle asmadmin 648372224 May 29 11:15 full_JMRACxxx_20150529_880974780_5_1.bak
-rw-r----- 1 oracle asmadmin 524435456 May 29 11:15 full_JMRACxxx_20150529_880974780_6_1.bak
-rw-r----- 1 oracle asmadmin 18579456 May 29 11:15 full_JMRACxxx_20150529_880974935_7_1.bak
-rw-r----- 1 oracle asmadmin 98304 May 29 11:15 full_JMRACxxx_20150529_880974935_8_1.bak
-rw-r--r-- 1 oracle asmadmin 1371 May 29 11:08 initjmrac.ora
[oracle@node2 rman_back]$
[oracle@node2 rman_back]$ ll -h
total 1.3G
-rw-r----- 1 oracle asmadmin 82M May 29 11:16 arch_JMRAC_20150529_10_1.bak
-rw-r----- 1 oracle asmadmin 14M May 29 11:16 arch_JMRAC_20150529_11_1.bak
-rw-r----- 1 oracle asmadmin 34M May 29 11:16 arch_JMRAC_20150529_9_1.bak
-rw-r----- 1 oracle asmadmin 18M May 29 11:16 ctl_JMRAC_20150529_12_1.bak
-rw-r----- 1 oracle asmadmin 619M May 29 11:15 full_JMRACxxx_20150529_880974780_5_1.bak
-rw-r----- 1 oracle asmadmin 501M May 29 11:15 full_JMRACxxx_20150529_880974780_6_1.bak
-rw-r----- 1 oracle asmadmin 18M May 29 11:15 full_JMRACxxx_20150529_880974935_7_1.bak
-rw-r----- 1 oracle asmadmin 96K May 29 11:15 full_JMRACxxx_20150529_880974935_8_1.bak
-rw-r--r-- 1 oracle asmadmin 1.4K May 29 11:08 initjmrac.ora
[oracle@node2 rman_back]$
1.3.2.4
将备份传递到
target
库
这个方法就多了，可以采用ftp 上传下载，也可以采用NFS网络文件系统，或者scp命令都可以，这里我们采用scp 直接传递。
源库：
[oracle@node2 rman_back]$ scp -r /home/oracle/rman_back oracle@192.168.59.129:/home/oracle
ssh: connect to host 192.168.59.129 port 22: Network is unreachable
lost connection
由于source db 的IP为192.168.1.32，而目标库的IP为192.168.59.129，不在同一个网段，所以我对目标库再添加一块网卡，所以目标库的IP 配置如下：
目标库再添加一块网卡后：
[oracle@orcltest ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:E7:E6:B0
inet addr:192.168.59.129 Bcast:192.168.59.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fee7:e6b0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:165 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17969 (17.5 KiB) TX bytes:17510 (17.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:0C:29:E7:E6:A6
inet addr: 192.168.1.128 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fee7:e6a6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:746 (746.0 b) TX bytes:1152 (1.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5558 errors:0 dropped:0 overruns:0 frame:0
TX packets:5558 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:354142 (345.8 KiB) TX bytes:354142 (345.8 KiB)
源库scp 操作：
[oracle@node2 rman_back]$ scp -r /home/oracle/rman_back oracle@192.168.1.128:/home/oracle
The authenticity of host '192.168.1.128 (192.168.1.128)' can't be established.
RSA key fingerprint is 77:e6:11:1a:7c:c7:81:7c:88:c9:21:18:51:2a:84:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.128' (RSA) to the list of known hosts.
oracle@192.168.1.128's password:
ctl_JMRAC_20150529_12_1.bak 100% 18MB 17.7MB/s 00:01
arch_JMRAC_20150529_10_1.bak 100% 81MB 27.0MB/s 00:03
arch_JMRAC_20150529_9_1.bak 100% 33MB 16.5MB/s 00:02
full_JMRACxxx_20150529_880974935_7_1.bak 100% 18MB 17.7MB/s 00:01
full_JMRACxxx_20150529_880974780_5_1.bak 100% 618MB 12.4MB/s 00:50
initjmrac.ora 100% 1371 1.3KB/s 00:00
full_JMRACxxx_20150529_880974780_6_1.bak 100% 500MB 15.2MB/s 00:33
arch_JMRAC_20150529_11_1.bak 100% 14MB 3.4MB/s 00:04
full_JMRACxxx_20150529_880974935_8_1.bak 100% 96KB 96.0KB/s 00:00
[oracle@node2 rman_back]$
目标库查看结果：
[oracle@orcltest rman_back]$ ll -h
total 1.3G
-rw-r----- 1 oracle oinstall 82M May 29 12:26 arch_JMRAC_20150529_10_1.bak
-rw-r----- 1 oracle oinstall 14M May 29 12:28 arch_JMRAC_20150529_11_1.bak
-rw-r----- 1 oracle oinstall 34M May 29 12:26 arch_JMRAC_20150529_9_1.bak
-rw-r----- 1 oracle oinstall 18M May 29 12:26 ctl_JMRAC_20150529_12_1.bak
-rw-r----- 1 oracle oinstall 619M May 29 12:27 full_JMRACxxx_20150529_880974780_5_1.bak
-rw-r----- 1 oracle oinstall 501M May 29 12:28 full_JMRACxxx_20150529_880974780_6_1.bak
-rw-r----- 1 oracle oinstall 18M May 29 12:26 full_JMRACxxx_20150529_880974935_7_1.bak
-rw-r----- 1 oracle oinstall 96K May 29 12:28 full_JMRACxxx_20150529_880974935_8_1.bak
-rw-r--r-- 1 oracle oinstall 1.4K May 29 12:27 initjmrac.ora
[oracle@orcltest rman_back]$
至此，源库rac 上需要操作的内容已完成。
1.3.3 target 库上执行
1.3.3.1 修改 pfile 文件生成 spfile 文件、生成 pfile 中的文件路径
主要有两方面的修改：
? 修改含文件路径的参数，达到符合当前服务器环境的实际情况 ，如audit_file_dest，control_files，db_recovery_file_dest
? 修改多实例相关的参数 ,如 cluster_database，带有实例名的前缀
源pfile 文件内容：
[oracle@orcltest rman_back]$ cp initjmrac.ora initjmrac.ora_bk
[oracle@orcltest rman_back]$ more initjmrac.ora _bk
jmrac1.__db_cache_size=16777216
jmrac2.__db_cache_size=16777216
jmrac1.__java_pool_size=4194304
jmrac2.__java_pool_size=4194304
jmrac1.__large_pool_size=4194304
jmrac2.__large_pool_size=4194304
jmrac1.__pga_aggregate_target=209715200
jmrac2.__pga_aggregate_target=209715200
jmrac1.__sga_target=314572800
jmrac2.__sga_target=314572800
jmrac1.__shared_io_pool_size=0
jmrac2.__shared_io_pool_size=0
jmrac1.__shared_pool_size=281018368
jmrac2.__shared_pool_size=281018368
jmrac1.__streams_pool_size=0
jmrac2.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/jmrac/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='+DATA/jmrac/controlfile/current.273.877470341','+DATA/jmrac/controlfile/current.272.877470343'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_name='jmrac'
*.db_recovery_file_dest='+DATA'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=jmracXDB)'
jmrac2.instance_number=2
jmrac1.instance_number=1
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=524288000
*.nls_date_format='YYYY-MM-DD HH24:mi:ss'
*.open_cursors=300
*.processes=1500
*.remote_listener='remote_lsnr_jmrac'
*.remote_login_passwordfile='exclusive'
jmrac2.thread=2
jmrac1.thread=1
jmrac2.undo_tablespace='UNDOTBS2'
jmrac1.undo_tablespace='UNDOTBS1'
[oracle@orcltest rman_back]$
最终修改完之后，这里的初始化参数如下，比如原来的文件精简不少：
[oracle@orcltest rman_back]$ more initjmrac .ora
*.audit_file_dest='/u01/app/oracle/admin/jmrac/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/jmrac/control01.ctl','/u01/app/oracle/oradata/jmrac/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='jmrac'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=jmracXDB)'
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=524288000
*.nls_date_format='YYYY-MM-DD HH24:mi:ss'
*.open_cursors=300
*.processes=1500
*.remote_login_passwordfile='exclusive'
创建相关路径：
[oracle@orcltest onlinelog]$ mkdir -p /u01/app/oracle/admin/jmrac/adump
[oracle@orcltest onlinelog]$ mkdir -p /u01/app/oracle/oradata/jmrac/
[oracle@orcltest onlinelog]$ sqlplus -v
SQL*Plus: Release 11.2.0.1.0 Production
[oracle@orcltest onlinelog]$
[oracle@orcltest ~]$ env | grep ORA
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
[oracle@orcltest ~]$ cd /u01/app/oracle/
生成spfile 文件：
[oracle@orcltest dbs]$ ORACLE_SID=jmrac
[oracle@orcltest dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 29 13:58:37 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> create spfile from pfile='/home/oracle/rman_back/initjmrac.ora';
File created.
SQL> exit
Disconnected
[oracle@orcltest dbs]$ cd $ORACLE_HOME/dbs
[oracle@orcltest dbs]$ ll spfilejmrac.ora
-rw-r----- 1 oracle asmadmin 2560 May 29 13:59 spfilejmrac.ora
[oracle@orcltest dbs]$
1.3.3.2 启动到 nomount 状态并还原控制文件
[oracle@orcltest dbs]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri May 29 14:45:56 2015
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup nomount;
Oracle instance started
Total System Global Area 521936896 bytes
Fixed Size 2214936 bytes
Variable Size 482345960 bytes
Database Buffers 29360128 bytes
Redo Buffers 8015872 bytes
RMAN> restore controlfile from '/home/oracle/rman_back/ctl_JMRAC_20150529_12_1.bak';
Starting restore at 2015-05-29 14:47:09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1146 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
output file name=/u01/app/oracle/oradata/jmrac/control01.ctl
output file name=/u01/app/oracle/oradata/jmrac/control02.ctl
Finished restore at 2015-05-29 14:47:13
RMAN>
控制文件已经还原，注意 此处控制文件的还原路径是spfile 中指定的路径 ，接下来还原数据文件及恢复数据库。
1.3.3.3 启动到 mount 状态并还原和恢复整个数据库
一、 restore 数据库
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> list backupset summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
------- -- -- - ----------- ------------------- ------- ------- ---------- ---
5 B F A DISK 2015-05-29 11:15:26 1 1 NO TAG20150529T111259
6 B F A DISK 2015-05-29 11:15:31 1 1 NO TAG20150529T111259
7 B F A DISK 2015-05-29 11:15:38 1 1 NO TAG20150529T111259
8 B F A DISK 2015-05-29 11:15:39 1 1 NO TAG20150529T111259
9 B A A DISK 2015-05-29 11:16:13 1 1 NO TAG20150529T111603
10 B A A DISK 2015-05-29 11:16:17 1 1 NO TAG20150529T111603
11 B A A DISK 2015-05-29 11:16:23 1 1 NO TAG20150529T111603
RMAN>
RMAN> list backupset of archivelog all;
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ -------------------
9 33.09M DISK 00:00:08 2015-05-29 11:16:13
BP Key: 9 Status: AVAILABLE Compressed: NO Tag: TAG20150529T111603
Piece Name: /home/oracle/rman_back/arch_JMRAC_20150529_9_1.bak
List of Archived Logs in backup set 9
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- ------------------- ---------- ---------
1 24 1389153 2015-05-10 17:55:23 1442215 2015-05-12 12:42:40
1 25 1442215 2015-05-12 12:42:40 1466390 2015-05-12 17:10:39
1 26 1466390 2015-05-12 17:10:39 1466392 2015-05-12 17:10:40
1 27 1466392 2015-05-12 17:10:40 1512521 2015-05-13 10:40:54
1 28 1512521 2015-05-13 10:40:54 1512530 2015-05-13 10:40:56
2 31 1389149 2015-05-10 17:55:22 1419988 2015-05-12 10:06:07
2 32 1419988 2015-05-12 10:06:07 1419992 2015-05-12 10:06:07
2 33 1444571 2015-05-12 13:34:16 1453906 2015-05-12 15:52:46
2 34 1454056 2015-05-12 15:57:38 1466360 2015-05-12 17:07:19
2 35 1466388 2015-05-12 17:10:39 1489679 2015-05-13 09:43:06
2 36 1489679 2015-05-13 09:43:06 1489698 2015-05-13 09:43:08
2 37 1490870 2015-05-13 10:00:32 1512524 2015-05-13 10:40:55
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ -------------------
10 81.07M DISK 00:00:12 2015-05-29 11:16:17
BP Key: 10 Status: AVAILABLE Compressed: NO Tag: TAG20150529T111603
Piece Name: /home/oracle/rman_back/arch_JMRAC_20150529_10_1.bak
List of Archived Logs in backup set 10
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- ------------------- ---------- ---------
1 29 1513517 2015-05-13 10:42:36 1591218 2015-05-29 10:15:08
1 30 1591218 2015-05-29 10:15:08 1613556 2015-05-29 10:39:43
1 31 1613556 2015-05-29 10:39:43 1621589 2015-05-29 11:09:52
2 38 1512524 2015-05-13 10:40:55 1570420 2015-05-29 10:11:10
2 39 1570420 2015-05-29 10:11:10 1570422 2015-05-29 10:11:11
2 40 1592133 2015-05-29 10:20:48 1613554 2015-05-29 10:39:43
2 41 1613554 2015-05-29 10:39:43 1613562 2015-05-29 10:39:44
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ -------------------
11 13.66M DISK 00:00:01 2015-05-29 11:16:23
BP Key: 11 Status: AVAILABLE Compressed: NO Tag: TAG20150529T111603
Piece Name: /home/oracle/rman_back/arch_JMRAC_20150529_11_1.bak
List of Archived Logs in backup set 11
Thrd Seq Low SCN Low Time Next SCN Next Time
---- ------- ---------- ------------------- ---------- ---------
1 32 1621589 2015-05-29 11:09:52 1625242 2015-05-29 11:15:48
1 33 1625242 2015-05-29 11:15:48 1625293 2015-05-29 11:15:58
2 42 1613951 2015-05-29 10:41:18 1625245 2015-05-29 11:15:49
2 43 1625245 2015-05-29 11:15:49 1625253 2015-05-29 11:15:53
RMAN>
这里需要注意的是，数据文件的转换，由于原rac 库是asm存储的，所以到新环境需要采用set newname来转换一下，相关的可以参考哥的blog：【oracle官网】 Restoring a Database on a New Host http://blog.itpub.net/26736162/viewspace-1548104/ ，这里就直接操作了。
先得到转换的脚本：
SQL> set pagesize 200 linesize 200
SQL> select 'set newname for datafile ' || a.FILE# || ' to "' || a.NAME || '";'
2 from v$datafile a
3 union all
4 select 'set newname for tempfile ' || a.FILE# || ' to "' || a.NAME || '";'
5 from v$tempfile a
6 union all
7 SELECT 'SQL "ALTER DATABASE RENAME FILE ''''' || a.MEMBER || ''''' to ''''' ||
8 a.MEMBER || ''''' ";'
9 FROM v$logfile a;
'SETNEWNAMEFORDATAFILE'||A.FILE#||'TO"'||A.NAME||'";'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
set newname for datafile 1 to "+DATA/jmrac/datafile/system.268.877470209";
set newname for datafile 2 to "+DATA/jmrac/datafile/sysaux.269.877470211";
set newname for datafile 3 to "+DATA/jmrac/datafile/undotbs1.270.877470213";
set newname for datafile 4 to "+DATA/jmrac/datafile/users.271.877470213";
set newname for datafile 5 to "+DATA/jmrac/datafile/example.279.877470401";
set newname for datafile 6 to "+DATA/jmrac/datafile/undotbs2.280.877470779";
set newname for tempfile 1 to "+DATA/jmrac/tempfile/temp.278.877470381";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.276.877470349'' to ''+DATA/jmrac/onlinelog/group_2.276.877470349'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.277.877470349'' to ''+DATA/jmrac/onlinelog/group_2.277.877470349'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.274.877470345'' to ''+DATA/jmrac/onlinelog/group_1.274.877470345'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.275.877470345'' to ''+DATA/jmrac/onlinelog/group_1.275.877470345'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.281.877470929'' to ''+DATA/jmrac/onlinelog/group_3.281.877470929'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.282.877470931'' to ''+DATA/jmrac/onlinelog/group_3.282.877470931'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.283.877470937'' to ''+DATA/jmrac/onlinelog/group_4.283.877470937'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.284.877470943'' to ''+DATA/jmrac/onlinelog/group_4.284.877470943'' ";
15 rows selected.
SQL>
修改后如下：
RUN
{
ALLOCATE CHANNEL c1 DEVICE TYPE DISK;
set newname for datafile 1 to "/u01/app/oracle/oradata/jmrac/system01.dbf";
set newname for datafile 2 to "/u01/app/oracle/oradata/jmrac/sysaux01.dbf";
set newname for datafile 3 to "/u01/app/oracle/oradata/jmrac/undotbs01.dbf";
set newname for datafile 4 to "/u01/app/oracle/oradata/jmrac/users01.dbf";
set newname for datafile 5 to "/u01/app/oracle/oradata/jmrac/example01.dbf";
set newname for datafile 6 to "/u01/app/oracle/oradata/jmrac/undotbs02.dbf";
set newname for tempfile 1 to "/u01/app/oracle/oradata/jmrac/temp01.dbf";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.276.877470349'' to ''/u01/app/oracle/oradata/jmrac/redo02_1.log'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.277.877470349'' to ''/u01/app/oracle/oradata/jmrac/redo02_2.log'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.274.877470345'' to ''/u01/app/oracle/oradata/jmrac/redo01_1.log'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.275.877470345'' to ''/u01/app/oracle/oradata/jmrac/redo01_2.log'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.281.877470929'' to ''/u01/app/oracle/oradata/jmrac/redo03_1.log'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.282.877470931'' to ''/u01/app/oracle/oradata/jmrac/redo03_2.log'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.283.877470937'' to ''/u01/app/oracle/oradata/jmrac/redo04_1.log'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.284.877470943'' to ''/u01/app/oracle/oradata/jmrac/redo04_2.log'' ";
RESTORE DATABASE;
SWITCH DATAFILE ALL;
SWITCH TEMPFILE ALL;
}
rman 中还原数据文件：
RMAN> RUN
2> {
3> ALLOCATE CHANNEL c1 DEVICE TYPE DISK;
4> set newname for datafile 1 to "/u01/app/oracle/oradata/jmrac/system01.dbf";
5> set newname for datafile 2 to "/u01/app/oracle/oradata/jmrac/sysaux01.dbf";
6> set newname for datafile 3 to "/u01/app/oracle/oradata/jmrac/undotbs01.dbf";
7> set newname for datafile 4 to "/u01/app/oracle/oradata/jmrac/users01.dbf";
8> set newname for datafile 5 to "/u01/app/oracle/oradata/jmrac/example01.dbf";
9> set newname for datafile 6 to "/u01/app/oracle/oradata/jmrac/undotbs02.dbf";
10> set newname for tempfile 1 to "/u01/app/oracle/oradata/jmrac/temp01.dbf";
11> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.276.877470349'' to ''/u01/app/oracle/oradata/jmrac/redo02_1.log'' ";
12> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.277.877470349'' to ''/u01/app/oracle/oradata/jmrac/redo02_2.log'' ";
13> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.274.877470345'' to ''/u01/app/oracle/oradata/jmrac/redo01_1.log'' ";
14> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.275.877470345'' to ''/u01/app/oracle/oradata/jmrac/redo01_2.log'' ";
15> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.281.877470929'' to ''/u01/app/oracle/oradata/jmrac/redo03_1.log'' ";
16> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.282.877470931'' to ''/u01/app/oracle/oradata/jmrac/redo03_2.log'' ";
17> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.283.877470937'' to ''/u01/app/oracle/oradata/jmrac/redo04_1.log'' ";
18> SQL "ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.284.877470943'' to ''/u01/app/oracle/oradata/jmrac/redo04_2.log'' ";
19>
20> RESTORE DATABASE;
21> SWITCH DATAFILE ALL;
22> SWITCH TEMPFILE ALL;
23> }
allocated channel: c1
channel c1: SID=1137 device type=DISK
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.276.877470349'' to ''/u01/app/oracle/oradata/jmrac/redo02_1.log''
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_2.277.877470349'' to ''/u01/app/oracle/oradata/jmrac/redo02_2.log''
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.274.877470345'' to ''/u01/app/oracle/oradata/jmrac/redo01_1.log''
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_1.275.877470345'' to ''/u01/app/oracle/oradata/jmrac/redo01_2.log''
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.281.877470929'' to ''/u01/app/oracle/oradata/jmrac/redo03_1.log''
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_3.282.877470931'' to ''/u01/app/oracle/oradata/jmrac/redo03_2.log''
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.283.877470937'' to ''/u01/app/oracle/oradata/jmrac/redo04_1.log''
sql statement: ALTER DATABASE RENAME FILE ''+DATA/jmrac/onlinelog/group_4.284.877470943'' to ''/u01/app/oracle/oradata/jmrac/redo04_2.log''
Starting restore at 2015-05-29 15:16:46
channel c1: starting datafile backup set restore
channel c1: specifying datafile(s) to restore from backup set
channel c1: restoring datafile 00002 to /u01/app/oracle/oradata/jmrac/sysaux01.dbf
channel c1: restoring datafile 00003 to /u01/app/oracle/oradata/jmrac/undotbs01.dbf
channel c1: restoring datafile 00005 to /u01/app/oracle/oradata/jmrac/example01.dbf
channel c1: reading from backup piece /home/oracle/rman_back/full_JMRACxxx_20150529_880974780_6_1.bak
channel c1: piece handle=/home/oracle/rman_back/full_JMRACxxx_20150529_880974780_6_1.bak tag=TAG20150529T111259
channel c1: restored backup piece 1
channel c1: restore complete, elapsed time: 00:00:35
channel c1: starting datafile backup set restore
channel c1: specifying datafile(s) to restore from backup set
channel c1: restoring datafile 00001 to /u01/app/oracle/oradata/jmrac/system01.dbf
channel c1: restoring datafile 00004 to /u01/app/oracle/oradata/jmrac/users01.dbf
channel c1: restoring datafile 00006 to /u01/app/oracle/oradata/jmrac/undotbs02.dbf
channel c1: reading from backup piece /home/oracle/rman_back/full_JMRACxxx_20150529_880974780_5_1.bak
channel c1: piece handle=/home/oracle/rman_back/full_JMRACxxx_20150529_880974780_5_1.bak tag=TAG20150529T111259
channel c1: restored backup piece 1
channel c1: restore complete, elapsed time: 00:00:35
Finished restore at 2015-05-29 15:17:57
datafile 1 switched to datafile copy
input datafile copy RECID=8 STAMP=880989478 file name=/u01/app/oracle/oradata/jmrac/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=9 STAMP=880989478 file name=/u01/app/oracle/oradata/jmrac/sysaux01.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=10 STAMP=880989478 file name=/u01/app/oracle/oradata/jmrac/undotbs01.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=11 STAMP=880989478 file name=/u01/app/oracle/oradata/jmrac/users01.dbf
datafile 5 switched to datafile copy
input datafile copy RECID=12 STAMP=880989478 file name=/u01/app/oracle/oradata/jmrac/example01.dbf
datafile 6 switched to datafile copy
input datafile copy RECID=13 STAMP=880989479 file name=/u01/app/oracle/oradata/jmrac/undotbs02.dbf
renamed tempfile 1 to /u01/app/oracle/oradata/jmrac/temp01.dbf in control file
released channel: c1
RMAN>
告警日志：
Fri May 29 15:16:45 2015
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_2.276.877470349' to '/u01/app/oracle/oradata/jmrac/redo02_1.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_2.276.877470349
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_2.276.877470349' to '/u01/app/oracle/oradata/jmrac/redo02_1.log'
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_2.277.877470349' to '/u01/app/oracle/oradata/jmrac/redo02_2.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_2.277.877470349
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_2.277.877470349' to '/u01/app/oracle/oradata/jmrac/redo02_2.log'
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_1.274.877470345' to '/u01/app/oracle/oradata/jmrac/redo01_1.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_1.274.877470345
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_1.274.877470345' to '/u01/app/oracle/oradata/jmrac/redo01_1.log'
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_1.275.877470345' to '/u01/app/oracle/oradata/jmrac/redo01_2.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_1.275.877470345
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_1.275.877470345' to '/u01/app/oracle/oradata/jmrac/redo01_2.log'
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_3.281.877470929' to '/u01/app/oracle/oradata/jmrac/redo03_1.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_3.281.877470929
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_3.281.877470929' to '/u01/app/oracle/oradata/jmrac/redo03_1.log'
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_3.282.877470931' to '/u01/app/oracle/oradata/jmrac/redo03_2.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_3.282.877470931
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_3.282.877470931' to '/u01/app/oracle/oradata/jmrac/redo03_2.log'
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_4.283.877470937' to '/u01/app/oracle/oradata/jmrac/redo04_1.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_4.283.877470937
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_4.283.877470937' to '/u01/app/oracle/oradata/jmrac/redo04_1.log'
ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_4.284.877470943' to '/u01/app/oracle/oradata/jmrac/redo04_2.log'
Deleted Oracle managed file +DATA/jmrac/onlinelog/group_4.284.877470943
Completed: ALTER DATABASE RENAME FILE '+DATA/jmrac/onlinelog/group_4.284.877470943' to '/u01/app/oracle/oradata/jmrac/redo04_2.log'
Fri May 29 15:16:51 2015
Full restore complete of datafile 3 to datafile copy /u01/app/oracle/oradata/jmrac/undotbs01.dbf. Elapsed time: 0:00:02
checkpoint is 1624119
last deallocation scn is 1529290
Undo Optimization current scn is 1542977
Full restore complete of datafile 5 to datafile copy /u01/app/oracle/oradata/jmrac/example01.dbf. Elapsed time: 0:00:09
checkpoint is 1624119
last deallocation scn is 1379034
Fri May 29 15:17:18 2015
Full restore complete of datafile 2 to datafile copy /u01/app/oracle/oradata/jmrac/sysaux01.dbf. Elapsed time: 0:00:30
checkpoint is 1624119
last deallocation scn is 1348692
Full restore complete of datafile 6 to datafile copy /u01/app/oracle/oradata/jmrac/undotbs02.dbf. Elapsed time: 0:00:00
checkpoint is 1624083
last deallocation scn is 1549684
Undo Optimization current scn is 1542977
Full restore complete of datafile 4 to datafile copy /u01/app/oracle/oradata/jmrac/users01.dbf. Elapsed time: 0:00:01
checkpoint is 1624083
Fri May 29 15:17:52 2015
Full restore complete of datafile 1 to datafile copy /u01/app/oracle/oradata/jmrac/system01.dbf. Elapsed time: 0:00:29
checkpoint is 1624083
last deallocation scn is 1547365
Undo Optimization current scn is 1542977
Fri May 29 15:18:00 2015
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14335.trc:
ORA-19625: error identifying file +DATA/jmrac/datafile/system.268.877470209
ORA-17503: ksfdopn:2 Failed to open file +DATA/jmrac/datafile/system.268.877470209
ORA-15012: ASM file '+DATA/jmrac/datafile/system.268.877470209' does not exist
Switch of datafile 1 complete to datafile copy
checkpoint is 1624083
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14335.trc:
ORA-19625: error identifying file +DATA/jmrac/datafile/sysaux.269.877470211
ORA-17503: ksfdopn:2 Failed to open file +DATA/jmrac/datafile/sysaux.269.877470211
ORA-15012: ASM file '+DATA/jmrac/datafile/sysaux.269.877470211' does not exist
Switch of datafile 2 complete to datafile copy
checkpoint is 1624119
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14335.trc:
ORA-19625: error identifying file +DATA/jmrac/datafile/undotbs1.270.877470213
ORA-17503: ksfdopn:2 Failed to open file +DATA/jmrac/datafile/undotbs1.270.877470213
ORA-15012: ASM file '+DATA/jmrac/datafile/undotbs1.270.877470213' does not exist
Switch of datafile 3 complete to datafile copy
checkpoint is 1624119
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14335.trc:
ORA-19625: error identifying file +DATA/jmrac/datafile/users.271.877470213
ORA-17503: ksfdopn:2 Failed to open file +DATA/jmrac/datafile/users.271.877470213
ORA-15012: ASM file '+DATA/jmrac/datafile/users.271.877470213' does not exist
Switch of datafile 4 complete to datafile copy
checkpoint is 1624083
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14335.trc:
ORA-19625: error identifying file +DATA/jmrac/datafile/example.279.877470401
ORA-17503: ksfdopn:2 Failed to open file +DATA/jmrac/datafile/example.279.877470401
ORA-15012: ASM file '+DATA/jmrac/datafile/example.279.877470401' does not exist
Switch of datafile 5 complete to datafile copy
checkpoint is 1624119
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14335.trc:
ORA-19625: error identifying file +DATA/jmrac/datafile/undotbs2.280.877470779
ORA-17503: ksfdopn:2 Failed to open file +DATA/jmrac/datafile/undotbs2.280.877470779
ORA-15012: ASM file '+DATA/jmrac/datafile/undotbs2.280.877470779' does not exist
Fri May 29 15:18:01 2015
Signalling error 1152 for datafile 5!
Switch of datafile 6 complete to datafile copy
checkpoint is 1624083
Signalling error 1152 for datafile 6!
Checker run found 2 new persistent data failures
查看数据文件是否已经还原：
[oracle@orcltest jmrac]$ ll -h
total 1.5G
-rw-r----- 1 oracle asmadmin 18M May 29 15:18 control01.ctl
-rw-r----- 1 oracle asmadmin 18M May 29 15:18 control02.ctl
-rw-r----- 1 oracle asmadmin 101M May 29 15:16 example01.dbf
-rw-r----- 1 oracle asmadmin 541M May 29 15:17 sysaux01.dbf
-rw-r----- 1 oracle asmadmin 691M May 29 15:17 system01.dbf
-rw-r----- 1 oracle asmadmin 91M May 29 15:16 undotbs01.dbf
-rw-r----- 1 oracle asmadmin 26M May 29 15:17 undotbs02.dbf
-rw-r----- 1 oracle asmadmin 27M May 29 15:17 users01.dbf
[oracle@orcltest jmrac]$
二、 recover 数据库
由前边的备份集中可以看出，备份集中的thread 1 的最大日志号为33，thread 2的最大日志号为43 ，所以不完全恢复如下：
RMAN> RUN
2> {
3> set until sequence 33 thread 1;
set until sequence 43 thread 2;
recover database;
}
4> 5> 6>
executing command: SET until clause
executing command: SET until clause
Starting recover at 2015-05-29 15:28:05
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1146 device type=DISK
starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=2 sequence=42
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=32
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=33
channel ORA_DISK_1: reading from backup piece /home/oracle/rman_back/arch_JMRAC_20150529_11_1.bak
channel ORA_DISK_1: piece handle=/home/oracle/rman_back/arch_JMRAC_20150529_11_1.bak tag=TAG20150529T111603
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archived log file name=/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_2_42_bpj5896k_.arc thread=2 sequence=42
archived log file name=/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_32_bpj5897f_.arc thread=1 sequence=32
channel default: deleting archived log(s)
archived log file name=/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_32_bpj5897f_.arc RECID=74 STAMP=880990089
archived log file name=/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_33_bpj5897n_.arc thread=1 sequence=33
channel default: deleting archived log(s)
archived log file name=/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_2_42_bpj5896k_.arc RECID=75 STAMP=880990089
channel default: deleting archived log(s)
archived log file name=/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_33_bpj5897n_.arc RECID=73 STAMP=880990089
media recovery complete, elapsed time: 00:00:02
Finished recover at 2015-05-29 15:28:12
RMAN>
告警日志：
Fri May 29 15:28:06 2015
alter database recover datafile list clear
Completed: alter database recover datafile list clear
alter database recover datafile list
1 , 2 , 3 , 4 , 5 , 6
Completed: alter database recover datafile list
1 , 2 , 3 , 4 , 5 , 6
alter database recover if needed
start until cancel using backup controlfile
Media Recovery Start
started logmerger process
Parallel Media Recovery started with 2 slaves
ORA-279 signalled during: alter database recover if needed
start until cancel using backup controlfile
...
alter database recover logfile '/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_2_42_bpj5896k_.arc'
Media Recovery Log /u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_2_42_bpj5896k_.arc
ORA-279 signalled during: alter database recover logfile '/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_2_42_bpj5896k_.arc'...
alter database recover logfile '/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_32_bpj5897f_.arc'
Media Recovery Log /u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_32_bpj5897f_.arc
ORA-279 signalled during: alter database recover logfile '/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_32_bpj5897f_.arc'...
alter database recover logfile '/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_33_bpj5897n_.arc'
Media Recovery Log /u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_33_bpj5897n_.arc
ORA-279 signalled during: alter database recover logfile '/u01/app/oracle/flash_recovery_area/JMRAC/archivelog/2015_05_29/o1_mf_1_33_bpj5897n_.arc'...
alter database recover cancel
Media Recovery Canceled
Completed: alter database recover cancel
1.3.3.4 RESETLOGS 打开数据库并验证数据
RMAN> alter database open resetlogs;
database opened
RMAN>
告警日志：
Fri May 29 15:30:56 2015
alter database open
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
ORA-1589 signalled during: alter database open...
alter database open resetlogs
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 3 of thread 2
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 3 of thread 2
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
RESETLOGS after incomplete recovery UNTIL CHANGE 1625245
Resetting resetlogs activation ID 1916751680 (0x723f4f40)
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/u01/app/oracle/oradata/jmrac/redo01_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/jmrac/redo02_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 3 of thread 2
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 3 of thread 2
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 3 thread 2: '/u01/app/oracle/oradata/jmrac/redo03_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_ora_14414.trc:
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_2.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 4 thread 2: '/u01/app/oracle/oradata/jmrac/redo04_1.log'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Fri May 29 15:31:08 2015
Setting recovery target incarnation to 3
Fri May 29 15:31:08 2015
Assigning activation ID 1920208641 (0x72740f01)
LGWR: STARTING ARCH PROCESSES
Fri May 29 15:31:09 2015
ARC0 started with pid=22, OS id=14444
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Fri May 29 15:31:10 2015
ARC1 started with pid=26, OS id=14446
Fri May 29 15:31:10 2015
ARC2 started with pid=27, OS id=14448
ARC1: Archival started
Fri May 29 15:31:10 2015
ARC3 started with pid=28, OS id=14450
ARC2: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /u01/app/oracle/oradata/jmrac/redo01_1.log
Current log# 1 seq# 1 mem# 1: /u01/app/oracle/oradata/jmrac/redo01_2.log
Successful open of redo thread 1
Fri May 29 15:31:10 2015
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri May 29 15:31:10 2015
SMON: enabling cache recovery
Redo thread 2 internally disabled at seq 1 (CKPT)
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC1: Archiving disabled thread 2 sequence 1
Archived Log entry 76 added for thread 2 sequence 1 ID 0x0 dest 1:
Successfully onlined Undo Tablespace 2.
Dictionary check beginning
Fri May 29 15:31:14 2015
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_dbw0_14084.trc:
ORA-01157: cannot identify/lock data file 201 - see DBWR trace file
ORA-01110: data file 201: '/u01/app/oracle/oradata/jmrac/temp01.dbf'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Errors in file /u01/app/oracle/diag/rdbms/jmrac/jmrac/trace/jmrac_dbw0_14084.trc:
ORA-01186: file 201 failed verification tests
ORA-01157: cannot identify/lock data file 201 - see DBWR trace file
ORA-01110: data file 201: '/u01/app/oracle/oradata/jmrac/temp01.dbf'
File 201 not verified due to error ORA-01157
Dictionary check complete
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Re-creating tempfile /u01/app/oracle/oradata/jmrac/temp01.dbf
Database Characterset is ZHS16GBK
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Fri May 29 15:31:22 2015
Starting background process QMNC
Fri May 29 15:31:22 2015
QMNC started with pid=29, OS id=14454
LOGSTDBY: Validating controlfile with logical metadata
LOGSTDBY: Validation complete
Completed: alter database open resetlogs
Fri May 29 15:31:33 2015
Starting background process CJQ0
Fri May 29 15:31:33 2015
CJQ0 started with pid=35, OS id=14472
验证数据：
[oracle@orcltest dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 29 15:33:02 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
SQL> show parameter name
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
db_file_name_convert string
db_name string jmrac
db_unique_name string jmrac
global_names boolean FALSE
instance_name string jmrac
lock_name_space string
log_file_name_convert string
service_names string jmrac
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 1
Next log sequence to archive 1
Current log sequence 1
SQL> set line 9999 pagesize 9999
SQL> col FILE_NAME format a60
SQL> select 'datafile' file_type, file#,name FILE_NAME,status,enabled from v$datafile
2 union all
3 select 'tempfile',file#,name FILE_NAME,status,enabled from v$tempfile
4 union all
5 select 'logfile',group# file#,member FILE_NAME,status,'' from v$logfile
6 union all
7 select 'controlfile', to_number('') ,name FILE_NAME,status,'' from v$controlfile
8 ;
FILE_TYPE FILE# FILE_NAME STATUS ENABLED
----------- ---------- ------------------------------------------------------------ ------- ----------
datafile 1 /u01/app/oracle/oradata/jmrac/system01.dbf SYSTEM READ WRITE
datafile 2 /u01/app/oracle/oradata/jmrac/sysaux01.dbf ONLINE READ WRITE
datafile 3 /u01/app/oracle/oradata/jmrac/undotbs01.dbf ONLINE READ WRITE
datafile 4 /u01/app/oracle/oradata/jmrac/users01.dbf ONLINE READ WRITE
datafile 5 /u01/app/oracle/oradata/jmrac/example01.dbf ONLINE READ WRITE
datafile 6 /u01/app/oracle/oradata/jmrac/undotbs02.dbf ONLINE READ WRITE
tempfile 1 /u01/app/oracle/oradata/jmrac/temp01.dbf ONLINE READ WRITE
logfile 2 /u01/app/oracle/oradata/jmrac/redo02_1.log
logfile 2 /u01/app/oracle/oradata/jmrac/redo02_2.log
logfile 1 /u01/app/oracle/oradata/jmrac/redo01_1.log
logfile 1 /u01/app/oracle/oradata/jmrac/redo01_2.log
logfile 3 /u01/app/oracle/oradata/jmrac/redo03_1.log
logfile 3 /u01/app/oracle/oradata/jmrac/redo03_2.log
logfile 4 /u01/app/oracle/oradata/jmrac/redo04_1.log
logfile 4 /u01/app/oracle/oradata/jmrac/redo04_2.log
controlfile /u01/app/oracle/oradata/jmrac/control01.ctl
controlfile /u01/app/oracle/oradata/jmrac/control02.ctl
17 rows selected.
SQL> select count(1) from lhr.rac_to_single_test ;
COUNT(1)
----------
72510
SQL>
可以看到数据已经恢复。
1.3.3.5 后续收尾操作
做到这步，都还没有完啊，只是说目的基本达成，最后还需要收尾的工作。清除未使用线程的 redo 日志组，操作如下：
一、 清除未使用的 redo
SQL> col instance format a8
SQL> select thread#,instance,status,enabled from v$thread;
THREAD# INSTANCE STATUS ENABLED
---------- -------- ------ --------
1 jmrac OPEN PUBLIC
2 jmrac2 CLOSED PUBLIC
SQL> select group#,thread#,archived,status from v$log;
GROUP# THREAD# ARC STATUS
---------- ---------- --- ----------------
1 1 NO CURRENT
2 1 YES UNUSED
3 2 YES ACTIVE
4 2 YES UNUSED
SQL> alter database disable thread 2 ;
Database altered.
SQL> alter database drop logfile group 3 ;
Database altered.
SQL> alter database drop logfile group 4 ;
Database altered.
SQL>
SQL> select thread#,instance,status,enabled from v$thread;
THREAD# INSTANCE STATUS ENABLED
---------- -------- ------ --------
1 jmrac OPEN PUBLIC
SQL>
SQL> select group#,thread#,archived,status from v$log;
GROUP# THREAD# ARC STATUS
---------- ---------- --- ----------------
1 1 NO CURRENT
2 1 YES UNUSED
SQL>
生产环境可以再增加一些日志组。
二、 清除多余的 undo 文件
我们知道rac 中每个节点使用的都是自己的undo，所以有2个undo文件，这里可以清除，也可以不用清除，因为有的时候undo坏了可以很迅速的切换到另外的undo 空间，清理过程如下：
SQL> select name from v$tablespace where name like 'UNDO%';
NAME
------------------------------
UNDOTBS1
UNDOTBS2
SQL> show parameter undo_tablespace;
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
undo_tablespace string UNDOTBS1
SQL> drop tablespace undotbs2 including contents and datafiles;
Tablespace dropped.
SQL>
1.3.4 实验总结
rac数据库迁移到单实例环境下的步骤和单实例的数据库迁移到单实例环境基本是一样的，只是在最后还原的时候需要设置2 个thread 即可。
1.4 总结
至此，rac 数据库迁移到单实例环境下的操作步骤基本完毕，至于配置监听和tns 等工作都是基本的，大家自己完成即可，这里就不再演示了，另外实验中需要关注的几个地方，我都特别做了说明。
以上的文章是转载别人的，其中有一点需要说一下：就是我们在源端的rac环境中备份完成传输的目标端的单实例数据库中以后使用rman会完成控制文件，在恢复数据文件的时候会报
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/08/2018 05:03:36
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
报错出现的原因：由于在生产上备份的目录和测试库上的存放备份文件的目录不一致导致的。
RMAN将执行一个隐式交叉检查，将备份标记为过期。
RMAN在备份期间放置备份的位置查找备份。备份已被放置在新主机上的新目录中。备份被保存到磁盘上，并在新主机的另一个不同位置恢复。可以使用以下命令查看：
RMAN> crosscheck backup;
RMAN> crosscheck copy;
发出RMAN crosscheck命令将验证备份是否存在于备份期间所放置的磁盘位置上。
当客户将备份放在不同的位置时，会发生过期状态。
可用状态表明RMAN知道备份，并将在还原期间使用备份。
为了告诉RMAN磁盘上备份的位置已经更改，请使用RMAN catalog命令。
的例子,编目多个备份在一个目录:
下面的示例编目了复制到/tmp director中的备份片段的目录：
执行
RMAN> CATALOG START WITH '/tmp/';
有的时候我们执行完成以后还会报错这个时候需要调整一下incaraction.
使用list incarnation；
reset database to incarnation 2
