我们先看一下c++ 中的参数解释
第一个输入的点是一个, (N, 3) 维的 三维坐标系中的点, xyz
第二个是旋转向量,
第三个是平移向量.
第四个是相机内参,
第五个是相机的畸变系数, 如果输入是4个时, 就是[k1, k2, p1, p2], 输入5个时就是 [k1, k2, p1, p2, k3], 也可以是更多, [k1, k2, p1, p2, k3, k4, k5, k6]
实战在python里面, 我用lidar的点往图像上投影的时候是这么用的(lidar上的3d框, 即8个点.)
rotation = lidar2camera_pose[:3, :3] translation = lidar2camera_pose[:3, 3] dist = np.array(camera_disinfo) imagePoints, _ = cv2.projectPoints(lidar_points, rotation, translation, camera_K, dist) imagePoints = np.reshape(imagePoints, (8, 2)) maxrect = cv2.boundingRect(imagePoints.astype(int))但是这样做无法把相机后面的点给排除掉, 所以可以这样改
lidar_points = np.dot(lidar2camera_pose[:3, :3], lidar_points.T).T + lidar2camera_pose[:3, [3]].reshape(1, 3) lidar_points = lidar_points[lidar_points[:, 2]>0] if len(lidar_points) < 8: return None rotation = np.eye(3) translation = np.zeros((3, 1)) dist = np.array(camera_disinfo) imagePoints, flag = cv2.projectPoints(lidar_points, rotation, translation, camera_K, dist) imagePoints = np.reshape(imagePoints, (8, 2)) maxrect = cv2.boundingRect(imagePoints.astype(int))来源地址：https://blog.csdn.net/qfpkzheng/article/details/131103247
