本篇文章为大家展示了CentOS sensors软件如何监控主板CPU数据，内容简明扼要并且容易理解，绝对能使你眼前一亮，通过这篇文章的详细介绍希望你能有所收获。
在Linux下有个叫CentOS sensors的软件可以帮助我们来监控主板，CPU的工作电压，风扇转速、温度等数据。这些数据我们通常在主板的 BIOS也可以看到。当我们可以在机器运行的时候通过CentOS sensors随时来监测着CPU的温度变化，可以预防呵保护因为CPU过热而会烧掉。
安装CentOS sensors现在基本上每个Linux都已经有CentOS sensors包了，我们主要安装了就可以了。或者我们也可以通过源文件来自己编译。1)在FC，RH， CENTOS下，用rpm：[root@securitycn ~]# rpm -ivh lm_sensors-2.10.0-3.1.i386.rpm3)编译源文件安装我们可以通过:这里下载源文件这里我们要注意的问题是要先安装libsysfs库，是Sysfsutils，Sysfsutils－devel软件
tar xzvf lm-sensors-xxx.tar.gz make user make user_install testing下面我们就用一些简单的命令来利用CentOS sensors来得到CPU的数据。我们要用root的身份来：sensors-detect，然后它会自动搜索主板上的chipset和相应的driver,我们全部答YES就可以了[root@securitycn ~]# sensors-detect
# sensors-detect revision 1.413 (2006/01/19 20:28:00) This program will help you determine which I2C/SMBus modules you need to load to use lm_sensors most effectively. You need to have i2c and lm_sensors installed before running this program. Also, you need to be `root', or at least have access to the /dev/i2c-* files, for most things. If you have patched your kernel and have some drivers built in, you can safely answer NO if asked to load some modules. In this case, things may seem a bit confusing, but they will still work. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. You do not need any special privileges for this. Do you want to probe now? (YES/no):全部默认YES即可。然后我们启动CentOS sensors：
/etc/init.d/lm_sensors start Starting lm_sensors: [ OK ]我们可以通过lsmod来确定我们需要的driver已经加载了没有
lsmod | grep i2c i2c_isa 9153 2 w83627hf,w83781d i2c_i801 11341 0 i2c_dev 12613 0 i2c_ec 9025 1 sbs i2c_core 23745 6 w83627hf,w83781d,i2c_isa,i2c_i801,i2c_dev,i2c_ec然后我们用CentOS sensors的命令就可以了：
[root@securitycn ~]# sensors w83627hf-isa-0290 Adapter: ISA adapter VCore 1: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM VCore 2: +3.36 V (min = +0.00 V, max = +0.00 V) ALARM +3.3V: +0.93 V (min = +3.14 V, max = +3.46 V) ALARM +5V: +5.11 V (min = +4.73 V, max = +5.24 V) +12V: +4.56 V (min = +10.82 V, max = +13.19 V) ALARM -12V: -7.10 V (min = -13.18 V, max = -10.88 V) ALARM -5V: -1.93 V (min = -5.25 V, max = -4.75 V) ALARM V5SB: +5.51 V (min = +4.73 V, max = +5.24 V) ALARM VBat: +0.02 V (min = +2.40 V, max = +3.60 V) ALARM fan1: 0 RPM (min = 2732 RPM, div = 2) ALARM fan2: 0 RPM (min = 0 RPM, div = 2) fan3: 0 RPM (min = 0 RPM, div = 2) temp1: +38癈 (high = +50癈, hyst = +45癈) sensor = thermistor temp2: +33.5癈 (high = +80癈, hyst = +75癈) sensor = thermistor temp3: +33.5癈 (high = +80癈, hyst = +75癈) sensor = thermistor vid: +0.000 V (VRM Version 10.0) alarms: beep_enable: Sound alarm enabled这里我们可以看到温度还没有相对应CPU，我们主要稍微修改一下/etc/sensors.conf就可以了，不过其实都不用我们自己去动手，一般我们都可以从主板生产商那里下载到配置文件。通过CentOS sensors我们就可以得到主板温度，CPU电压，风扇转速这些信息。我们可以根据这些数据来监察系统的运行情况来预防系统的问题。
接下来让它和MRTG整合在一起吧
[root@securitycn ~]# cd /usr/local/mrtg/bin [root@securitycn ~]# vi temp.sh #内容如下 #!/bin/bash cputemp=`/usr/bin/sensors | grep temp1 |awk '{print $2}'|cut -c 2-4` #这句是说找出有temp1那一行,印出第二个列的2-4个字 systemp =`/usr/bin/sensors | grep temp2 |awk '{print $2}'|cut -c 2-5` 不用解释了吧 echo $cputemp echo $systemp # the uptime uptime | sed 's:^.* up \(.*\), [0-9][0-9]* users.*$:\1:' # my name uname -n[root@securitycn ~]# chmod +x temp.sh 改成可执行 [root@securitycn ~]# ./temp.sh 试试看有没有问题 39 33.5 15:36:19 up 22:28, 1 user, load average: 0.04, 0.09, 0.04 securitycnCentOS sensors再来写下面的文件
[root@securitycn ~]# cd ../etc/ [root@securitycn ~]# vi temp.cfgWorkDir: /data1/usr/apache/htdocs/mrtg/temp/ Target[index]: `/usr/local/mrtg/bin/temp.sh` MaxBytes[index]:80 Options[index]: gauge, nopercent, growright YLegend[index]: Temp (度) ShortLegend[index]: 度 LegendO[index]: 系统温度; LegendI[index]: CPU温度; Title[index]: 系统温度表 PageTop[index]: <H1>主机温度表</H1>[root@securitycn ~]# /usr/local/mrtg/bin/mrtg /usr/local/mrtg/etc/temp.cfg执行3次就不报错了然后加入到crontab里面*/5 * * * * /usr/local/mrtg/bin/mrtg /usr/local/mrtg/etc/temp.cfgPageTop[index]: <H1>主机温度表
上述内容就是CentOS sensors软件如何监控主板CPU数据，你们学到知识或技能了吗？如果还想学到更多技能或者丰富自己的知识储备，欢迎关注编程网行业资讯频道。
