文章详情

短信预约-IT技能 免费直播动态提醒

请输入下面的图形验证码

提交验证

短信预约提醒成功

如何解析sql_slave_skip_counter 参数的用法

2023-06-06 03:52

关注

如何解析sql_slave_skip_counter 参数的用法,很多新手对此不是很清楚,为了帮助大家解决这个难题,下面小编将为大家详细讲解,有这方面需求的人可以来学习下,希望你能有所收获。

这里浅析一下sql_slave_skip_counter的具体用法和意义!

set global sql_slave_skip_counter = N
This statement skips the next N events from the master. 
(即是跳过N个events,这里最重要的是理解event的含义!在mysql中,对于sql的 binary log 实际上是由一连串的event组成的一个组,即事务组。)
在备库上设置 global sql_slave_skip_counter =N 会跳过当前时间来自于master的之后N个事件,这对于恢复由某条SQL语句引起的从库复制有效. 此语句只在当slave threads是停止时才有效,否则将发生一条错误..每忽略一个事件,N 减一,直到N减为0!
When using this statement, it is important to understand that the binary log is actually organized as a sequence of groups known as event groups. Each event group consists of a sequence of events.
For transactional tables, an event group corresponds to a transaction.
For nontransactional tables, an event group corresponds to a single SQL statement.
Note
   A single transaction can contain changes to both transactional and nontransactional tables.When you use SET GLOBAL sql_slave_skip_counter to skip events and the result is in the middle of a group, the slave continues to skip events until it reaches the end of the group. Execution then starts with the next event group
### comment ###
   Setting this variable isn't like setting other server variables: you can't read the variable back again as @@sql_slave_skip_counter, and it isn't really a "global variable." Rather, it's a variable that only the slave thread reads.
  When you restart the slave threads again with START SLAVE, the slave skips statements and decrements the variable until it reaches 0, at which point it begins executing statements again. You can watch this happening by executing SHOW SLAVE STATUS, where the variable's value appears in the Skip_Counter column. This is the only place you can see its value.
  The effect is that the setting isn't persistent. If you set it to 1, start the slave, and the slave has an error in replication sometime later, the variable won't still be set to 1. It'll be 0. At that point, if you want the slave to skip the statement that caused the error, you'll have to set it to 1 again.

有关"SET GLOBAL sql_slave_skip_counter"的语法可以参考官方文档

测试环境:

rac3 主库

rac4 备库

测试之前保证主从无数据延时,保证数据一致!

1 使用含有 stop slave 的命令, 在主库上创建测试表,并使用shell 插入数据!

mysql> create table tab_skip(id int);
Query OK, 0 rows affected (0.80 sec)

[root@rac3 mysql]#

 for i in {1..100}; 

   do 

    echo $i; 

    echo "insert into tab_skip(id) values($i)" | mysql -h227.0.0.1 test ; 

    sleep 1;

done;

在备库 使用 set global sql_slave_skip_counter=1;命令做测试

[root@rac4 mysql]# 

for i in {1..10}; 

do 

   echo $i; 

   echo "slave stop;set global sql_slave_skip_counter=1; slave start;show slave status\G" | mysql -h227.0.0.1 -P3306 test ; 

   sleep 2;

done;

分别在主库和备库上进行验证数据的完整性:

主库上面:

[root@rac3 mysql]# mysql
mysql> use test;                 
Database changed
mysql> select count(1) from tab_1;
+----------+
| count(1) |
+----------+
|      100 |
+----------+
1 row in set (0.00 sec)

备库上面,少了 10条数据!因为正是执行set global sql_slave_skip_counter=1;使备库执行sql replay的时候忽略了事件!

[root@rac4 mysql]# mysql
mysql> use test;
Database changed
mysql> select count(1) from tab_1;  
+----------+
| count(1) |
+----------+
|       90 |
+----------+
1 row in set (0.00 sec)

有网友测试的是在备库上执行没有stop slave 语句的命令,但是在5.5.18版本上面是不允许的!

[root@rac3 mysql]# for i in {1..100}; do echo $i; echo "insert into tab_2(id) values($i)" | mysql -h227.0.0.1 test ; sleep 2;done;   
1

....

100

在备库上执行,注:"set global sql_slave_skip_counter=1; slave start;show slave status\G"  没有stop slave 语句,报错!

[root@rac4 mysql]# for i in {1..10}; do echo $i; echo "set global sql_slave_skip_counter=1; slave start;show slave status\G" | mysql -h227.0.0.1 -P3306 test ; sleep 2;done;          
1
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first
2
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first
3
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first
4
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first

使用 该参数能够解决从服务器sql 进程停止导致的数据库不同步,但是也有一定的风险,比如在高并发的数据库环境下,可能会导致数据丢失!

另见另一位网友的测试实验(多少有些出入,他的可以不使用stop slave)

看完上述内容是否对您有帮助呢?如果还想对相关知识有进一步的了解或阅读更多相关文章,请关注编程网行业资讯频道,感谢您对编程网的支持。

阅读原文内容投诉

免责声明:

① 本站未注明“稿件来源”的信息均来自网络整理。其文字、图片和音视频稿件的所属权归原作者所有。本站收集整理出于非商业性的教育和科研之目的,并不意味着本站赞同其观点或证实其内容的真实性。仅作为临时的测试数据,供内部测试之用。本站并未授权任何人以任何方式主动获取本站任何信息。

② 本站未注明“稿件来源”的临时测试数据将在测试完成后最终做删除处理。有问题或投稿请发送至: 邮箱/279061341@qq.com QQ/279061341

软考中级精品资料免费领

  • 历年真题答案解析
  • 备考技巧名师总结
  • 高频考点精准押题
  • 2024年上半年信息系统项目管理师第二批次真题及答案解析(完整版)

    难度     813人已做
    查看
  • 【考后总结】2024年5月26日信息系统项目管理师第2批次考情分析

    难度     354人已做
    查看
  • 【考后总结】2024年5月25日信息系统项目管理师第1批次考情分析

    难度     318人已做
    查看
  • 2024年上半年软考高项第一、二批次真题考点汇总(完整版)

    难度     435人已做
    查看
  • 2024年上半年系统架构设计师考试综合知识真题

    难度     224人已做
    查看

相关文章

发现更多好内容

猜你喜欢

AI推送时光机
位置:首页-资讯-后端开发
咦!没有更多了?去看看其它编程学习网 内容吧
首页课程
资料下载
问答资讯