<H3C>sys
[H3C]int g1/0/1
[H3C-GigabitEthernet1/0/1]ipadd 123.232.115.11 24
[H3C-GigabitEthernet1/0/1]qu
[H3C]int g1/0/3
[H3C-GigabitEthernet1/0/3]ipadd 192.168.10.1 24
[H3C-GigabitEthernet1/0/3]qu
[H3C]interfaceGigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1]nat outbound
[H3C]iproute-static 0.0.0.0 0 123.232.115.10
配置ACL 3000，定义规则：允许IP流量。
[H3C]acladvanced 3000
[H3C-acl-ipv4-adv-3000]rule permit ip
[H3C-acl-ipv4-adv-3000]qu
向安全域Untrust中添加接口GigabitEthernet1/0/1
[H3C]security-zone name Untrust
[H3C-security-zone-Untrust]import interfaceGigabitEthernet 1/0/1
[H3C-security-zone-Untrust]qu
向安全域Trust中添加接口GigabitEthernet1/0/3
[H3C]security-zone name Trust
[H3C-security-zone-Trust]import interfaceGigabitEthernet 1/0/3
[H3C-security-zone-Trust]qu
[H3C]zone-pair security source Trustdestination local
[H3C-zone-pair-security-Trust-Local]packet-filter3000
[H3C-zone-pair-security-Trust-Local]qu
[H3C]zone-pairsecurity source local destination Trust
[H3C-zone-pair-security-Local-Trust]packet-filter3000
[H3C-zone-pair-security-Local-Trust]qu
[H3C]zone-pair security source Trustdestination Untrust
[H3C-zone-pair-security-Trust-Untrust]packet-filter3000
[H3C-zone-pair-security-Trust-Untrust]qu
如果设备上多个端口加入同一个安全域，那么还需要加一条下面命令，否则同一个端口下面的终端之间是不能互通的。
[H3C]security-zone intra-zone default permit
DHCP配置：
[H3C]dhcp enable
[H3C]dhcp serverip-pool 10
[H3C-dhcp-pool-10]network192.168.10.20 mask 255.255.255.0
[H3C-dhcp-pool-10]gateway-list 192.168.10.1
[H3C-dhcp-pool-10]dns-list 202.102.152.3202.102.128.68
定义各DHCP地址池禁止分配的IP地址（开始～结束）
[H3C-dhcp-pool-10]dhcp server forbidden-ip 192.168.10.1 192.168.10.100
http配置：
[H3C]ip httpenable
[H3C]ip https enable
[H3C]local-useradmin
[H3C-luser-manage-admin]service-typehttp https
[H3C-luser-manage-admin]password simple 123456
