这期内容当中小编将会给大家带来有关Linux系统监测cpu温度的具体方法是什么，文章内容丰富且以专业的角度为大家分析和叙述，阅读完这篇文章希望大家可以有所收获。
电脑在运行中肯定会产生热量，那么在Linux系统中如何检查cpu的温度呢？小编为大家分享一下Linux系统检查cpu温度的具体方法。
一、安装lm_sensors
[root@MPI_EXERCISE ~]# yum -y install lm_sensors
二、配置
[root@MPI_EXERCISE ~]# sensors-detect
Do you want to scan for them? This is totally safe. (YES/no): yes
Do you want to scan for Super I/O sensors? (YES/no): yes
This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): yes
Do you want to scan the ISA I/O ports? (YES/no): yes
Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (YES/no/selectively): yes
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (YES/no/selectively): yes
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): yes
Starting lm_sensors: loading module coretemp [ OK ]
Unloading i2c-dev… OK
三、查看温度
[root@MPI_EXERCISE ~]# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +103.0°C)
temp2: +29.8°C (crit = +103.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +30.0°C (high = +82.0°C, crit = +102.0°C)
Core 0: +25.0°C (high = +82.0°C, crit = +102.0°C)
Core 1: +30.0°C (high = +82.0°C, crit = +102.0°C)
用watch sensors可以观察cpu温度的变化，每隔两秒更新一次。
[root@localhost ~]# watch sensors
上述就是小编为大家分享的Linux系统监测cpu温度的具体方法是什么了，如果刚好有类似的疑惑，不妨参照上述分析进行理解。如果想知道更多相关知识，欢迎关注编程网行业资讯频道。
