记录：340
场景：在CentOS 7.9操作系统上，修改默认的ssh端口。ssh默认22端口，在实际开展业务中的生产环境中，通常会修改为指定端口号，以满足规范。
版本：
操作系统：CentOS 7.9
1.修改sshd_config配置文件
修改命令：vi /etc/ssh/sshd_config
修改内容：Port 10022
解析：在/etc/ssh/目录下，是ssh相关的配置信息。
2.重启sshd服务
重启命令：systemctl restart sshd
解析：修改端口后，需重启服务
3.查看端口信息
查看命令：netstat -atunlp | grep sshd
解析：使用netstat查看监听的端口和进程。
4.查看防火墙状态
查看状态：systemctl status firewalld
解析：查看防火墙状态，如果是Active: active (running)，则已经开启防火墙。如果是Active: inactive (dead)，则已关闭防火墙。
5.把端口10022添加到防火墙开放端口列表
添加端口：firewall-cmd --zone=public --add-port="10022"/tcp --permanent
解析：把10022端口持久化配置到开放端口列表中。
6.重新加载防火墙
命令：firewall-cmd --reload
解析：加载防火墙，使最新配置生效。
7.查看端口防火墙放行状态
命令：firewall-cmd --permanent --query-port="10022"/tcp
解析：查看端口防火墙已放行。
8.查看防火墙已放行的端口号列表
命令：firewall-cmd --zone=public --list-ports
解析：查看防火墙已放行的端口号列表。
9.使用Xshell客户端连接服务器
确认修改端口后，且开通防火墙后，可以使用Xshell等客户端工具连接服务器。
10.小结
(1)sshd服务支持配置多个端口号
ssh的配置文件sshd_config支持设置多个端口，比如22和10022可以都使用。
(2)确认新增端口可以使用后再关闭22端口
在实际工作中，确认新增端口可以使用后，再关闭22端口。因为一旦重启sshd服务后，22端口失效了。如果只修改了sshd端口，而没有开放防火墙，那么客户端是连接不上服务器。
这种情况，一旦发生，极有可能要到机房操作。一般而言，进机房审批流程等非常麻烦。因此，修改系统级别配置时，需多次自行确认无误，再下手操作。
11.附录sshd_config原始文件
命令：cat /etc/ssh/sshd_config
解析：查看原始文件，可以了解更多信息。
#$OpenBSD: sshd_config,v 1.100 2016/08/15 12:32:04 naddy Exp $# This is the sshd server system-wide configuration file. See# sshd_config(5) for more information.# This sshd was compiled with PATH=/usr/local/bin:/usr/bin# The strategy used for options in the default sshd_config shipped with# OpenSSH is to specify options with their default value where# possible, but leave them commented. Uncommented options override the# default value.# If you want to change the port on a SELinux system, you have to tell# SELinux about this change.# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER##Port 22#AddressFamily any#ListenAddress 0.0.0.0#ListenAddress ::HostKey /etc/ssh/ssh_host_rsa_key#HostKey /etc/ssh/ssh_host_dsa_keyHostKey /etc/ssh/ssh_host_ecdsa_keyHostKey /etc/ssh/ssh_host_ed25519_key# Ciphers and keying#RekeyLimit default none# Logging#SyslogFacility AUTHSyslogFacility AUTHPRIV#LogLevel INFO# Authentication:#LoginGraceTime 2m#PermitRootLogin yes#StrictModes yes#MaxAuthTries 6#MaxSessions 10#PubkeyAuthentication yes# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2# but this is overridden so installations will only check .ssh/authorized_keysAuthorizedKeysFile.ssh/authorized_keys#AuthorizedPrincipalsFile none#AuthorizedKeysCommand none#AuthorizedKeysCommandUser nobody# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts#HostbasedAuthentication no# Change to yes if you don't trust ~/.ssh/known_hosts for# HostbasedAuthentication#IgnoreUserKnownHosts no# Don't read the user's ~/.rhosts and ~/.shosts files#IgnoreRhosts yes# To disable tunneled clear text passwords, change to no here!#PasswordAuthentication yes#PermitEmptyPasswords noPasswordAuthentication yes# Change to no to disable s/key passwords#ChallengeResponseAuthentication yesChallengeResponseAuthentication no# Kerberos options#KerberosAuthentication no#KerberosOrLocalPasswd yes#KerberosTicketCleanup yes#KerberosGetAFSToken no#KerberosUseKuserok yes# GSSAPI optionsGSSAPIAuthentication yesGSSAPICleanupCredentials no#GSSAPIStrictAcceptorCheck yes#GSSAPIKeyExchange no#GSSAPIEnablek5users no# Set this to 'yes' to enable PAM authentication, account processing,# and session processing. If this is enabled, PAM authentication will# be allowed through the ChallengeResponseAuthentication and# PasswordAuthentication. Depending on your PAM configuration,# PAM authentication via ChallengeResponseAuthentication may bypass# the setting of "PermitRootLogin without-password".# If you just want the PAM account and session checks to run without# PAM authentication, then enable this but set PasswordAuthentication# and ChallengeResponseAuthentication to 'no'.# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several# problems.UsePAM yes#AllowAgentForwarding yes#AllowTcpForwarding yes#GatewayPorts noX11Forwarding yes#X11DisplayOffset 10#X11UseLocalhost yes#PermitTTY yes#PrintMotd yes#PrintLastLog yes#TCPKeepAlive yes#UseLogin no#UsePrivilegeSeparation sandbox#PermitUserEnvironment no#Compression delayed#ClientAliveInterval 0#ClientAliveCountMax 3#ShowPatchLevel no#UseDNS yes#PidFile /var/run/sshd.pid#MaxStartups 10:30:100#PermitTunnel no#ChrootDirectory none#VersionAddendum none# no default banner path#Banner none# Accept locale-related environment variablesAcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGESAcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENTAcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGEAcceptEnv XMODIFIERS# override default of no subsystemsSubsystemsftp/usr/libexec/openssh/sftp-server# Example of overriding settings on a per-user basis#Match User anoncvs#X11Forwarding no#AllowTcpForwarding no#PermitTTY no#ForceCommand cvs server以上，感谢。
2022年11月27日
来源地址：https://blog.csdn.net/zhangbeizhen18/article/details/128061979
