今天就跟大家聊聊有关C++中怎么实现LeetCode，可能很多人都不太了解，为了让大家更加了解，小编给大家总结了以下内容，希望大家根据这篇文章可以有所收获。
[LeetCode] 126. Word Ladder II 词语阶梯之二
Given two words (beginWord and endWord), and a dictionary's word list, find all shortest transformation sequence(s) from beginWord to endWord, such that:
Only one letter can be changed at a time
Each transformed word must exist in the word list. Note that beginWord is not a transformed word.
Note:
Return an empty list if there is no such transformation sequence.
All words have the same length.
All words contain only lowercase alphabetic characters.
You may assume no duplicates in the word list.
You may assume beginWord and endWord are non-empty and are not the same.
Example 1:
Input:
beginWord = "hit",
endWord = "cog",
wordList = ["hot","dot","dog","lot","log","cog"]
Output:
[
["hit","hot","dot","dog","cog"],
["hit","hot","lot","log","cog"]
]
Example 2:
Input:
beginWord = "hit"
endWord = "cog"
wordList = ["hot","dot","dog","lot","log"]Output: []
Explanation: The endWord "cog" is not in wordList, therefore no possible transformation.
个人感觉这道题是相当有难度的一道题，它比之前那道 Word Ladder 要复杂很多，全场第四低的通过率 12.9% 正说明了这道题的难度，博主也是研究了网上别人的解法很久才看懂，然后照葫芦画瓢的写了出来，下面这种解法的核心思想是 BFS，大概思路如下：目的是找出所有的路径，这里建立一个路径集 paths，用以保存所有路径，然后是起始路径p，在p中先把起始单词放进去。然后定义两个整型变量 level，和 minLevel，其中 level 是记录循环中当前路径的长度，minLevel 是记录最短路径的长度，这样的好处是，如果某条路径的长度超过了已有的最短路径的长度，那么舍弃，这样会提高运行速度，相当于一种剪枝。还要定义一个 HashSet 变量 words，用来记录已经循环过的路径中的词，然后就是 BFS 的核心了，循环路径集 paths 里的内容，取出队首路径，如果该路径长度大于 level，说明字典中的有些词已经存入路径了，如果在路径中重复出现，则肯定不是最短路径，所以需要在字典中将这些词删去，然后将 words 清空，对循环对剪枝处理。然后取出当前路径的最后一个词，对每个字母进行替换并在字典中查找是否存在替换后的新词，这个过程在之前那道 Word Ladder 里面也有。如果替换后的新词在字典中存在，将其加入 words 中，并在原有路径的基础上加上这个新词生成一条新路径，如果这个新词就是结束词，则此新路径为一条完整的路径，加入结果中，并更新 minLevel，若不是结束词，则将新路径加入路径集中继续循环。写了这么多，不知道你看晕了没有，还是看代码吧，这个最有效：
class Solution {public: vector<vector<string>> findLadders(string beginWord, string endWord, vector<string>& wordList) { vector<vector<string>> res; unordered_set<string> dict(wordList.begin(), wordList.end()); vector<string> p{beginWord}; queue<vector<string>> paths; paths.push(p); int level = 1, minLevel = INT_MAX; unordered_set<string> words; while (!paths.empty()) { auto t = paths.front(); paths.pop(); if (t.size() > level) { for (string w : words) dict.erase(w); words.clear(); level = t.size(); if (level > minLevel) break; } string last = t.back(); for (int i = 0; i < last.size(); ++i) { string newLast = last; for (char ch = 'a'; ch <= 'z'; ++ch) { newLast[i] = ch; if (!dict.count(newLast)) continue; words.insert(newLast); vector<string> nextPath = t; nextPath.push_back(newLast); if (newLast == endWord) { res.push_back(nextPath); minLevel = level; } else paths.push(nextPath); } } } return res; }};看完上述内容，你们对C++中怎么实现LeetCode有进一步的了解吗？如果还想了解更多知识或者相关内容，请关注编程网行业资讯频道，感谢大家的支持。
